August 31, 2012, 01:19 PM | #1 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
snub nose 38 load ?
I have a snub nose 38 and it is not rated for +P loads so I am looking for a place to start. I believe I want to use a 158 gr bullet.
what is your favorite load for self defense ? What is your favorite load for target and practice ? |
August 31, 2012, 01:23 PM | #2 |
Senior Member
Join Date: January 28, 2012
Posts: 215
|
I load a 158 grain LSWC with 3.5 grains of Bullseye for target practice and plinking. It's one of the more popular 158 grain LSWC .38 special loads.
|
August 31, 2012, 02:04 PM | #3 |
Junior member
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
|
The best option is a 148 grain wadcutter. Once again, maximum meplat, inherent accuracy, low recoil, and fantastic straight-line penetration. Only downside is potential problem with speed loaders and maximum meplat.
|
August 31, 2012, 04:30 PM | #4 |
Senior Member
Join Date: September 22, 2011
Location: Middle America
Posts: 518
|
I vote for the 148gr hollow base wad cutter too. They invert well and make a nasty hollow point. But reduce your load to compensate for the loss of case/powder volume. They do very well to 21 feet.
As for speed loaders. I've burned cases of wad cutters under time. Enjoy, OSOK |
August 31, 2012, 04:48 PM | #5 |
Senior Member
Join Date: December 13, 2010
Location: Virginia Beach
Posts: 2,016
|
wait...this is the handloading forum! Doh!
__________________
NRA Life Member USN Retired Last edited by Skadoosh; September 1, 2012 at 07:23 AM. |
August 31, 2012, 11:32 PM | #6 |
Senior Member
Join Date: December 10, 2005
Location: Central , OR
Posts: 1,888
|
For 38spl using 158 LSWC in my S&W 36 1.875" barrel I use Bullseye or W231.
With a LWC I use Bullseye, all with standard small primers. |
September 1, 2012, 08:58 AM | #7 |
Senior Member
Join Date: October 20, 2009
Location: Tennessee
Posts: 119
|
For practice, I use 158gr LSWC with both Unique and Universal powders. I find the Universal much better to work with.
|
|
|