|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 15, 2007, 08:41 PM | #1 |
Senior Member
Join Date: December 15, 2005
Location: South China, Maine
Posts: 814
|
who threaded your barrel?
I'm going to be picking up a suppressor for my 22lr in the near future, and Im curious... who threaded your barrel for the suppressor? Was it a gun smith, or machine shop?
__________________
Bushmaster Superlight AR-15 5.56mm / Custom 24" Heavy BBL Varmint AR-15 5.56mm / Ruger M77 .257 Roberts / Ruger MKI 22LR Pistol / EAA Witness 9mm Pistol / Daisy 2202 22LR / Remington Viper 522 22LR / Stevens 200 .223 / Savage 10FP 24" .308 / Mauser 98 Sporter 30-06 |
April 15, 2007, 10:08 PM | #2 |
Senior Member
Join Date: July 19, 2006
Posts: 147
|
I did mine myself but any good machine shop can do it. Any good gunsmith can also either do it or has someone that will. Make sure it is done correctly for your suppressor. The outback should be cut to .400 inch long any longer it will hit the first baffle. There are are few others with length issues also.
|
April 15, 2007, 10:17 PM | #3 |
Senior Member
Join Date: December 18, 2005
Location: Central Indiana
Posts: 1,981
|
http://www.jpgrips.com/ This is my go-to guy for all my threading needs. He does a wonderful job, and he is reasonably priced. I can provide photos of his work on my guns if you want.
__________________
Silencers have NEVER been illegal ! |
April 16, 2007, 09:32 AM | #4 |
Senior Member
Join Date: November 4, 2004
Location: Haslet,Texas(DFW area)
Posts: 1,506
|
one other factor that must be mentioned, and that is one of suppressor warranty...for example AAC will not warranty your suppressor unless the factory did the threads or it was sent to them for threading. Im sure there are other simular clauses amoung the other manufacturers. 10/22's are easy as you can just ship a barrel to be threaded instead of the whole thing, or buy a tactical innovations barrel that is allready threaded for example.
(and this isnt against any of the fine gunsmiths and machine shops that do fine work, its just the rules we are given to play by suppressor makers to assure a botched threading job dont cause damage...and them have to financially eat it)
__________________
Lighten up Francis!.....;Actor Warren Oats, in the movie "Stripes" |
April 16, 2007, 09:33 PM | #5 |
Senior Member
Join Date: June 17, 2006
Location: Seattle, WA
Posts: 179
|
It's not simply a matter of threads being cut. It needs to be aligned to the
bore's centerline. In addition, the shoulder adjacent to the threads must be of sufficient height, and be squared to the threads for proper abutment. That said, you've got to see how nicely this Ruger bull barrel was threaded.... the precision of the thread protector cleanly camoflages the cut. I saw Gemtech's craftsmanship and appreciated it so well, I had my local C2 perform the same before beadblasting the pistol's SS finish. My C2 was machinest in former life, and now a full time firefighter. When not working at the FD, he's in his shop/garage tooling. Nice thing is that he's 10 mins from my driveway and I dont have to worry about shipping/insurance etc.
__________________
raymond- 47.5N 122.2W |
April 16, 2007, 10:22 PM | #6 |
Senior Member
Join Date: December 18, 2005
Location: Central Indiana
Posts: 1,981
|
Yeah, what Raymond said. That pic is a beautiful example of Gemtech's craftsmanship in their field. Now, all of that stuff about warranties being said, you must also realize that Michelangelo wasn't the only artist on the planet. You just have to be careful about finding the right person with the right skills and equipment for the job. I wouldn't hand over a threading job to someone who hasn't done one before, no matter how skilled a machinist they are.
__________________
Silencers have NEVER been illegal ! |
April 17, 2007, 01:28 AM | #7 |
Senior Member
Join Date: December 15, 2005
Location: South China, Maine
Posts: 814
|
Raymond, that cut is the exact type of cut I am looking for!!!
What is C2? Where do I go to get more information on that?
__________________
Bushmaster Superlight AR-15 5.56mm / Custom 24" Heavy BBL Varmint AR-15 5.56mm / Ruger M77 .257 Roberts / Ruger MKI 22LR Pistol / EAA Witness 9mm Pistol / Daisy 2202 22LR / Remington Viper 522 22LR / Stevens 200 .223 / Savage 10FP 24" .308 / Mauser 98 Sporter 30-06 |
April 17, 2007, 03:11 AM | #8 |
Senior Member
Join Date: June 17, 2006
Location: Seattle, WA
Posts: 179
|
chris -
sorry, C2 shorthand for Class 2 manufacturer.....(C3 for Class 3 dealer). that's why I'm so lucky. he can build silencers, take my NFA gear and modify, etc. He's taken my 308 bolt gun and threaded, AR7 and threaded, the Ruger MkII, my FAL..... converted my HK SP-89 to accept A3 telescoping stock..... bottom line is as folks have said above... as long as the machinist has success- fully performed threading of barrels for suppressor use (not just muzzle brakes or flash hiders), then they may actually know and have experience with the task and the precision and alignments required. Gemtech will thread for about $100 which is what I gladly paid my C2 since I avoided the risk of shipping (and theft and loss). Ivan is on the Recommended Dealers List on the Bower's board.....give him a try, since he's near you. Ask if he threads. Ivan Shapiro - Northern Maine Tactical Supply Specialties: Class 2 PO Box 325 Fort Fairfield, ME 04742 Phone: (207) 476-0000 E-mail: [email protected] http://www.machinegundealer.com http://www.subguns.com/c2c3/c3state.htm#Maine
__________________
raymond- 47.5N 122.2W |
April 17, 2007, 02:32 PM | #9 |
Senior Member
Join Date: December 15, 2005
Location: South China, Maine
Posts: 814
|
Threading the barrel isnt much of an issue... I know several people around here that will do it. What I am absolutely in love with, and am searching hard to find, is someone who can cut and thread the barrel in a manner in which the threads can be hidding by a cap of sorts when the suppressor is not mounted on. (such as the first picture you attached of the Ruger pistol).
so far, my most favorite picture of a capped barrel that has been threaded is one I found on Sniper Central, but I believe he said he purchased the rifle already threaded, so asking him wouldnt prove to be of any help.
__________________
Bushmaster Superlight AR-15 5.56mm / Custom 24" Heavy BBL Varmint AR-15 5.56mm / Ruger M77 .257 Roberts / Ruger MKI 22LR Pistol / EAA Witness 9mm Pistol / Daisy 2202 22LR / Remington Viper 522 22LR / Stevens 200 .223 / Savage 10FP 24" .308 / Mauser 98 Sporter 30-06 |
April 17, 2007, 04:43 PM | #10 |
Senior Member
Join Date: June 17, 2006
Location: Seattle, WA
Posts: 179
|
sounds like i need to ask him how what the technique is, eh? lemme give that
a try and you can convey this to your machinst. i vaguely remember but would like to get the sequence correctly described. r-
__________________
raymond- 47.5N 122.2W |
April 17, 2007, 04:56 PM | #11 |
Senior Member
Join Date: December 15, 2005
Location: South China, Maine
Posts: 814
|
that would be outstanding! thank you!
__________________
Bushmaster Superlight AR-15 5.56mm / Custom 24" Heavy BBL Varmint AR-15 5.56mm / Ruger M77 .257 Roberts / Ruger MKI 22LR Pistol / EAA Witness 9mm Pistol / Daisy 2202 22LR / Remington Viper 522 22LR / Stevens 200 .223 / Savage 10FP 24" .308 / Mauser 98 Sporter 30-06 |
April 17, 2007, 10:10 PM | #12 |
Senior Member
Join Date: July 19, 2006
Posts: 147
|
Have you ever meet Ivan? He is about three hours from me and he is quite a fellow.
|
April 19, 2007, 08:40 AM | #13 |
Senior Member
Join Date: January 17, 2006
Posts: 379
|
P22. No threading required.
I did thread a Beretta 92 barrel for a friend once. At my shop I can use the manual or the CNC lathe but I really prefer the CNC. It lets me get right to the shoulder with a minimum undercut plus it's far more accurate than the old manuals. It's really no big deal as, like others have said, you have the barrel ID indicated in at the end of the barrel and at the chuck. Some barrels would make me nervous though. The bore and OD aren't exactly concentric. |
May 13, 2007, 02:11 PM | #14 |
Senior Member
Join Date: May 4, 2007
Location: Pensacola, Florida
Posts: 141
|
...
Doug @ SRT (www.srtarms.com) can and does do a decient job. He's worked on my Berretta 87 (not the Cheetah). What he did was cut down the barrel under the slide, and fabricate a .5x28 adapter that when screwed on to the barrel under the slide, looks to be part of the barrel. It fits my AAC Pilot and Gem-tech Outback II can's GREAT!!!
|
|
|