August 8, 2011, 05:40 PM | #1 |
Member
Join Date: July 2, 2007
Posts: 42
|
lee auto-prime 11
Do they still make the auto-prime 11? I lost my parts to do small rilfe primers... any HELP?
|
August 9, 2011, 03:07 AM | #2 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
|
Yes, I saw them at Midway, Midsouth, and I think at Natchez. The one's out now seem to all have square plates that I guess more betterly match most square primer box trays. It takes some eye-balling to get the large Federal try to line up with the old round Lee plate without dropping one or two primers.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
August 9, 2011, 07:31 AM | #3 |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,885
|
Do any of the newer AutoPrime parts (i.e., the body and the squeeze handle) fit the older model? (The squeeze handle is the thing that seems to be the most vulnerable to breakage over time.)
|
August 9, 2011, 07:05 PM | #4 |
Member
Join Date: July 2, 2007
Posts: 42
|
the auto prime mounts on top of the press.
|
August 9, 2011, 08:18 PM | #5 | |
Senior Member
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 3,055
|
Quote:
http://www.midwayusa.com/viewProduct...tNumber=728999 The lee safety prime also mounts on a press. http://www.midwayusa.com/viewProduct...tNumber=548630 The auto prime is a hand held primer. Like the new auto prime XR. http://www.midwayusa.com/viewProduct...tNumber=413473 No, the handles do not interchange from the older round tray auto prime. Only the shell holders are the same.
__________________
The more people I meet, the more I love my dog They're going to get their butts kicked over there this election. How come people can't spell and use words correctly? |
|
August 9, 2011, 08:34 PM | #6 |
Senior Member
Join Date: January 16, 2010
Location: If you have to ask...
Posts: 2,860
|
XR still getting mixed reviews. Glad I have a few old ones while they work it out.
__________________
Life Member NRA, TSRA Smokeless powder is a passing fad! -Steve Garbe I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call Lonesome Dove My favorite recipes start out with a handful of used wheelweights. |
August 10, 2011, 10:36 AM | #7 |
Senior Member
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 3,055
|
Welllll, I have a new XR, and it works quite well. It IS a better designed priming tool, it addresses the SUPPOSED problem of a whole tray of primers exploding because the one being pressed into the shell pops. Some ham handed gorilla may have hit the priming lever to get a primer to pop, I never have, that's for sure!
There's an elevator on the front that raises one primer above the level of the rest of the tray while one is being pressed into the shell. Also, there's a partition that further separates the main primer supply in the tray from the one being elevated. It seems to be easier to press each primer with the new one. My statement above is partially incorrect. The body of the old auto prime WILL work on the new XR. The tray, and cam assembly will go in and work. But one thing they changed on the new body is the top is wider to accommodate the WSM family of cases with their wide bases. On the old version, a dremel tool had to be used to open the top to allow the case to slide into the shell holder.
__________________
The more people I meet, the more I love my dog They're going to get their butts kicked over there this election. How come people can't spell and use words correctly? |
|
|