|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
August 28, 2017, 02:38 PM | #1 |
Senior Member
Join Date: September 13, 2005
Posts: 4,700
|
High Standard Victor ejector broke..
After 45 years, it really didn't owe me anything. Has anyone else replaced one, any tips or tricks ?
|
August 29, 2017, 11:00 AM | #2 |
Senior Member
Join Date: December 1, 2005
Location: Tampa Bay
Posts: 1,804
|
SIGSHR, The folks over at rimfirecentral.com have all the tricks.
|
August 29, 2017, 12:37 PM | #3 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Start here. http://stevespages.com/ipb-histandard-victor.html
You'll note there is no ejector on the parts list. I believe the extractor ejects too. On this page is the manual for an M107. That is the Victor. Don't think it's going to help much, but it can't hurt. http://stevespages.com/page7b.htm Gunparts wants $9.90 for a new extractor. I think I'd change the plunger and its spring too. $5.40 for the former. $3 for the spring.
__________________
Spelling and grammar count! |
August 29, 2017, 01:02 PM | #4 |
Senior Member
Join Date: September 13, 2005
Posts: 4,700
|
Yes, rimfirecentral was most helpful, a member there had some excellent videos.
|
August 30, 2017, 09:03 PM | #5 |
Senior Member
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,473
|
Extractor
The extractor pulls the fired case from the chamber as it is blown back and holds it against the bolt face as the bolt travels rearward. As it reaches maximum travel, the rim of the case strikes the tip of he ejector, on the frame at the left rear of the magazine well, and is kicked out out the open "port" at about the same time that the bolt has picked up a new cartridge.
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ... NRA Life Member Last edited by darkgael; August 30, 2017 at 09:12 PM. |
September 2, 2017, 08:19 AM | #6 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,824
|
darkgael is correct.
Show us a picture of the ejector as removed from the firearm.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
Thread Tools | Search this Thread |
|
|