December 9, 1999, 10:32 PM | #1 |
Senior Member
Join Date: October 19, 1999
Location: Lakeland Fl.U.S.A.
Posts: 173
|
I NEED TO KNOW HOW LONG THE HAMMER PLUNGER IS SUPPOSED TO BE? THANKYOU |
December 10, 1999, 08:23 AM | #2 |
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
|
James, I don't have that info nor do I have one in the shop to measure. If you're intending to make one, Gun Parts Corporation www.gunpartscorp.com lists them for $1.15, and Brownells www.brownells.com list them for $1.84. George
|
December 15, 1999, 02:29 PM | #3 |
Junior Member
Join Date: November 24, 1999
Location: Woodbury TN
Posts: 12
|
I just put one back togeather and read this. George is right it'd be a ho lot easier to order one. Let me know if you just need the dimension and Ill pull it out measure it for you. If your going to try and make one you'll need more than the length. Let me know
|
January 11, 2000, 08:39 PM | #4 |
Senior Member
Join Date: October 19, 1999
Location: Lakeland Fl.U.S.A.
Posts: 173
|
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by TomD:
I just put one back togeather and read this. George is right it'd be a ho lot easier to order one. Let me know if you just need the dimension and Ill pull it out measure it for you. If your going to try and make one you'll need more than the length. Let me know[/quote] |
January 12, 2000, 02:47 PM | #5 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Having put both sweat and blood (and maybe some tears) into making parts that could not be obtained, I don't understand why anyone would want to make a part that can be bought for a couple of bucks. Is it the challenge, or do folks not know that parts are available, or they don't know how hard it can be, or is it some American determination to "do it yourself"? Beats the heck out of me.
Jim |
January 13, 2000, 04:17 PM | #6 |
Senior Member
Join Date: October 19, 1999
Location: Lakeland Fl.U.S.A.
Posts: 173
|
hey guys i did not want to make the plunger pin.just size the one i bought from Brownells,the new one was way too long.i trimmed the new one a tab tooo much.just wanted to know if anyone had correct measurement.Thanks
|
Thread Tools | Search this Thread |
|
|