The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools Search this Thread
Old April 29, 2017, 08:19 AM   #1
LRS1951
Junior Member
 
Join Date: April 2, 2017
Posts: 5
Help with Sling Mount for High Standard Riot Gun

Newbie here.

I have a decent collection overall. I specifically have a "High Standard Riot Gun" (12-gauge). It has an full extension tube on a 18 1/8" barrel (making it an 18/6+1). It looks just like the last one posted in another Thread here - see pics attached... Never mind, pics won't upload.

Check this thread:

https://thefiringline.com/forums/sho...d.php?t=560998

It has almost no markings on it (High Standard, city / state, proofed for 12-gauge 2 3/4" shells, serial # on left side receiver #3211???.... no double letter date letters on barrel, nothing else). And it has rifle sights versus a bead.

I have had this shotgun (bought used but mint condition, still in excellent shape) about 30 years (maybe 35???).

It has a mounted recoil pad and a lower sling swivel on base of shoulder stock, but no swivel mount on front end.

I have looked at a number of swivel assemblies that attach to the feed tube in front of the pump action handle, but would prefer something that mounts to the end of the feed tube as shown in the modification here.

Any info would be appreciated.
LRS1951 is offline  
Old April 29, 2017, 08:44 AM   #2
FITASC
Senior Member
 
Join Date: December 6, 2014
Posts: 5,053
Have you looked at the offerings from CDM Gear?
__________________
"I believe that people have a right to decide their own destinies; people own themselves. I also believe that, in a democracy, government exists because (and only so long as) individual citizens give it a 'temporary license to exist'—in exchange for a promise that it will behave itself. In a democracy, you own the government—it doesn't own you."- Frank Zappa
FITASC is offline  
Old April 29, 2017, 03:32 PM   #3
LRS1951
Junior Member
 
Join Date: April 2, 2017
Posts: 5
Front tube cap sling assembly for High Standard Riot Gun

Yes, I have. They - and several other places -
have mounts that clamp on to the feeding tube forward of the pump forearm. I am specifically looking, as indicated, for a setup as shown in the other Thread on the High Standard Riot Gun with the rifle sights.

I found an (old, expired) online ad for a High Standard K120 Riot Gun. While I am not sure mine is a K120 (likely older), the resemblance is pretty much exact.

If the pics don't upload, the site I found is at:

http://www.armslist.com/posts/493061...tgun-12-guage-

Mine is definitely a 6+1 with an 18" barrel (18 1/8th inch) and full magazine tube extension.
I am looking to get a front end tube cap swivel mount as was set up on the indicated K120 (the sling swivel assembly is already on the stock - I got it that way).
LRS1951 is offline  
Old April 30, 2017, 05:00 PM   #4
Model12Win
Junior member
 
Join Date: October 20, 2012
Posts: 5,854
Use a Garand slong.
Model12Win is offline  
Old April 30, 2017, 05:27 PM   #5
INMY01TA
Senior Member
 
Join Date: November 30, 2008
Location: Marylandistan
Posts: 257
Magpul's forward sling mount should work with it, I have it on my 590 and it's great. Can use either paraclips or qd sockets. Just another option.


INMY01TA is offline  
Old April 30, 2017, 06:11 PM   #6
LRS1951
Junior Member
 
Join Date: April 2, 2017
Posts: 5
Sling Mount for High Standard Riot Gun

It already has a sling attachment in rear (wooden shoulder stock). It needs a magazine tube cap replacement (optional item) that would normally contain the front sling attachment.

I found a lot more info on the likely identity of the shotgun. Appears that it is a High Standard K120 or a K1200 Deluxe Riot Gun (18" barrel, rifle sights, full extension magazine tube that has had a recoil pad added prior to my possession).

I even located online a schematic diagram from High Standard for this line (it is like from the 1960s... the included price list for the numbered parts is amusing - brought back memories). Anyway, the part was both numbered and named. I checked the schematic diagram on Numrich Arms for this model and found the diagrams matched and the part was displayed - but not in stock!!!

So until the (unlikely) situation where it comes back in stock or I find one otherwise, I am going to have to go with a tube mount attachment similar to the one shown. My preference is one where the mounting is underneath rather than to the side - and can be purchased separately for the front attachment only as the rear attachment is already there.

And spare slings I have stored away. Leather, canvas, you name it.

P. S. In the movie "Getaway", Steve McQueen's character ("Doc") uses this same model in more than one shooting scene (I believe, if memory serves me right, that his was the Standard model with regular bead sight and not the rifle sights).

Pic attached is of current rear swivel attachment.
Attached Images
File Type: jpg IMG_0556.JPG (111.1 KB, 40 views)
LRS1951 is offline  
Old May 5, 2017, 12:55 PM   #7
Venom1956
Senior Member
 
Join Date: October 4, 2008
Location: WI
Posts: 3,656
Hey that's my thread! You can't really add it to the front because of how it mounts afaik. Easiest way is to replace the bolt with one with a sling loop. I took the bolt out and just compared it to ones at the shop to find mine.
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that.
I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug
Venom1956 is offline  
Old May 5, 2017, 11:18 PM   #8
LRS1951
Junior Member
 
Join Date: April 2, 2017
Posts: 5
RE: "Easiest way is to replace the bolt with one with a sling loop. I took the bolt out and just compared it to ones at the shop to find mine."

That sounds like a pretty good idea. And quite a bit more simple if I can locate a match.
LRS1951 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06920 seconds with 11 queries