The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old May 10, 2012, 04:25 PM   #1
john66mustang
Junior Member
 
Join Date: May 10, 2012
Posts: 7
C96 Broomhandle

I have a c96 Red 9. It has no serial no's. WAFFENFABRIK MAUSER OBERNDORF A/N on 3 lines on top of chamber. Left side has the MAUSER Trade mark above the handle. The right side has WAFFENFABRIK MAUSER OBERNDORF a NECKAR.
If anyone can tell be about this gun I would appreciate it. The barrel is 4-5/8" and has been welded to keep it from shooting. I purchased the gun for $10.00's and I am looking to replace the barrel. Need help to find a barrel.
Attached Images
File Type: jpg WR-Mauser-001.jpg (78.9 KB, 65 views)
File Type: jpg WR-Mauser-003.jpg (62.2 KB, 62 views)
File Type: jpg WR-German-051.jpg (199.8 KB, 61 views)
john66mustang is offline  
Old May 10, 2012, 06:09 PM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
Call John at Taylor Machine 253-445-4073. The barrel on C96s is not a separate piece, it is part of the upper receiver, so you will not likely find barrels anywhere.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old May 10, 2012, 07:16 PM   #3
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 21,824
Reline the barrel, not replace it.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old May 10, 2012, 07:54 PM   #4
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
The serial number on a "Red Nine" is where it is on all those pistols, on the sloped surface on the left upper part of the receiver.

I can't be certain without some better pictures, but I am pretty sure that is not a real gun at all. It looks like one of those dummies made up for collectors in areas where real guns are illegal. That would explain both the plugged barrel and the lack of serial numbers, and also the reason that you got it so cheap. (If it is a dummy, you didn't do too badly, those good quality dummies run as much as $100.)

I STRONGLY recommend you take that gun to a gunsmith or someone knowledgable before spending any money on it or even attempting to fire it with ANY ammunition.

Edited later to add: My first suspicion was focused on the grips; too new looking, the red color too bright. But I have been comparing that gun (the parts pictured) with a genuine Red 9 and still think the above assessment is correct. But it is good, darned good. I had to look at some real details to confirm (in my mind) what I suspected, like the thumbpiece on the safety being a separate part where on the real gun it is part of the safety and the grooving is different. And too many serrations on the bolt. I admit I am waiting to see if what the OP says. If it is a dummy, the OP need not feel bad; I think that "gun" would fool just about anyone.

Jim

Last edited by James K; May 10, 2012 at 09:02 PM.
James K is offline  
Old May 12, 2012, 12:24 AM   #5
BerdanSS
Senior Member
 
Join Date: April 3, 2011
Location: to close to other houses
Posts: 1,176
100% toy....cool one...but still a toy
BerdanSS is offline  
Old May 15, 2012, 12:28 PM   #6
john66mustang
Junior Member
 
Join Date: May 10, 2012
Posts: 7
Pics

Here is pictures of the gun.
Attached Images
File Type: jpg Display 1.jpg (184.6 KB, 33 views)
File Type: jpg Display 2.jpg (177.8 KB, 29 views)
File Type: jpg Display 3.jpg (146.5 KB, 26 views)

Last edited by john66mustang; May 15, 2012 at 12:50 PM. Reason: Uploat pictures
john66mustang is offline  
Old May 15, 2012, 12:51 PM   #7
john66mustang
Junior Member
 
Join Date: May 10, 2012
Posts: 7
Pics 2

More pictures
Attached Images
File Type: jpg Display 4.jpg (173.3 KB, 24 views)
File Type: jpg Display 5.jpg (136.9 KB, 17 views)
File Type: jpg Display 6.jpg (160.8 KB, 16 views)
john66mustang is offline  
Old May 15, 2012, 12:52 PM   #8
john66mustang
Junior Member
 
Join Date: May 10, 2012
Posts: 7
pics 3

More pictures
Attached Images
File Type: jpg Display 7.jpg (136.6 KB, 19 views)
File Type: jpg Display 8.jpg (139.6 KB, 17 views)
File Type: jpg Display 9.jpg (132.4 KB, 19 views)
john66mustang is offline  
Old May 15, 2012, 12:56 PM   #9
john66mustang
Junior Member
 
Join Date: May 10, 2012
Posts: 7
Pics 4

more pictures of the C96. I am a gunsmith and I do not believe this C96 is a toy. If it is I am very surprised. This gun came from a movie studio and they welded the barrel. If it was a toy why would they weld the barrel?
Attached Images
File Type: jpg Display 10.jpg (135.2 KB, 24 views)
File Type: jpg Display 11.jpg (119.5 KB, 24 views)
john66mustang is offline  
Old May 15, 2012, 02:59 PM   #10
Bill DeShivs
Senior Member
 
Join Date: April 7, 2006
Posts: 10,966
It doesn't take much of a gunsmith to see that the gun is die-cast zinc, not steel. Use a magnet and you'll see.
__________________
Bill DeShivs, Master Cutler
www.billdeshivs.com
Bill DeShivs is offline  
Old May 15, 2012, 05:19 PM   #11
john66mustang
Junior Member
 
Join Date: May 10, 2012
Posts: 7
Toy

Yes you are right. I did not even think of using a magnet. Thanks. I wonder why they would even weld the barrel? Thanks again
john66mustang is offline  
Old May 15, 2012, 05:40 PM   #12
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
Given the level of detail of the parts, my guess would be that it is not exactly a toy, but a replica firearm. Some replicas are almost exact copies of the real thing. If it came from a movie studio, that would not surprise me in the least.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old May 15, 2012, 09:41 PM   #13
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
Movie studio guns are rarely so detailed, and that one looks "correct" right down to the markings (the Red 9 doesn't have the Mauser "banner" on the left side, but that is a detail). The parts are not correct, either, though they probably function well enough to give the "locked breech" feel to the gun.

The ejector pin markings on the frame are a sign of investment casting; they eject the part from the mold and in doing so leave that unmistakeable circular mark.

Those guns are mostly made in Japan and sell for good prices in Japan and in other countries where real handguns are prohibited. They provide collectors with something about as close as legally possible to the real thing.

The barrels are plugged both for safety reasons in case someone did get hold of live ammunition, and because the law bans any thing that can fire a cartridge. That gun would probably blow up if fired, but if the barrel were not blocked it COULD be loaded and COULD fire, so legally it would be a gun and its owner could be sentenced to a long prison term.

Jim
James K is offline  
Old May 15, 2012, 11:01 PM   #14
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 28,675
I had one of the replica Broomhandles. They were quite popular back in the 1960s/70s when real Broomhandles were very scarce and expensive. (they still are, but the flood of chinese guns in the 80s/90s reduced the market for the replicas.

They are made to field strip like the real thing. The spring(s) are weak, the chambers were not cut full depth, the firing pins were a tad too short to fire live ammo, and the barrels were plugged with a steel rod. They were made from a zinc alloy.

In good shape, they are very difficult to tell from a real gun, at a glance. IN bad shape, its pretty obvious, as steel rusts, while zinc corrodes with a different color.

Real broomhandles have serial numbers. Replicas do not.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Old May 16, 2012, 02:15 PM   #15
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
That one almost fooled me and apparently did fool some very knowledgeable folks, including john66. The only one that ever fooled me close up was a replica of a British No. 2 MkI* revolver. It was crude, but no cruder than the originals. It actually took me a minute or two to realize what I was looking at.

Jim
James K is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.09378 seconds with 11 queries