July 25, 2008, 01:35 PM | #1 |
Senior Member
Join Date: June 5, 2005
Location: Henderson NV
Posts: 360
|
Savage trigger work
I have a Savage heavy barrel I believe is a model 12 in 308; I wondering if it can be fitted with an accutrigger or if the factory trigger can be adjusted to lighten the pull? any opinion would be apreciated.
|
July 25, 2008, 03:07 PM | #2 |
Senior Member
Join Date: March 31, 2008
Location: Dayton, TX
Posts: 383
|
I don't know about fitting an accutrigger, but the factory trigger can be adjusted somewhat by a smith familiar with the work or there are aftermarket triggers available. The one below is the first one that I found on the Brownells web site.
http://www.brownells.com/aspx/NS/sto...-110AA&s=18481 Joat
__________________
All things being equal, fat people use more soap. (I know I am one.) High speed, low drag does not even come close to describing ME. |
July 25, 2008, 07:17 PM | #3 |
Senior Member
Join Date: September 13, 2007
Location: Sunny Florida
Posts: 844
|
Savage
If it didn't come with an Accu Trigger, it can't be retrofitted. I called Savage and asked. Find a decent smith familiar with the design, should cost less than $40.
|
July 25, 2008, 09:10 PM | #4 |
Senior Member
Join Date: June 5, 2005
Location: Henderson NV
Posts: 360
|
thank you
I appreciate your input.
|
July 28, 2008, 05:42 PM | #5 |
Senior Member
Join Date: December 7, 2004
Location: Beatrice Nebraska
Posts: 613
|
I replaced mine with a Rifle Basix aftermarket trigger. Relatively easy, butI I did have a gunsmith check my work when I finished. He said I did just fine following the instructions! I ended up with a crisp 2# trigger with no perceptible creep or overtravel.
I think I gave $45 from the Bargain Bin at Cabelas. Andy |
August 15, 2008, 04:05 PM | #6 |
Senior Member
Join Date: March 21, 2008
Location: Glendale, AZ
Posts: 180
|
Incorrect... you can install an Accu-Trigger.
Hello all.
I just got off the phone with Stockade Gun Stocks. They're located in NE. They "can" install an Accu-Trigger on older Savage/Stevens rifles. It does require machining the receiver, but it's not a big deal. Kevin Rayhill, one of the principles, said that he does it all the time. It takes 20mins and costs $50 + shipping. This price includes the Accu-Trigger. Give them a shout! 308-432-5114 www.stockadegunstocks.com |
August 16, 2008, 09:34 AM | #7 | |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
Quote:
|
|
August 18, 2008, 06:44 PM | #8 |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
I checked out Stockade Gunstocks. Disappointed that they misspelled "brake"! Didn't see any triggers listed on the site, but maybe I didn't look closely enough.
|
August 18, 2008, 08:58 PM | #9 |
Junior Member
Join Date: February 28, 2006
Posts: 8
|
a friends savage
a friend of mine has a 111 savage and is trying to choose between a rifle basix and a timney trigger . is the timney as easy to install as a rifle basix trigger ( ive heard they're simple)
thanks in advance tom |
August 30, 2008, 12:24 PM | #10 |
Senior Member
Join Date: March 21, 2008
Location: Glendale, AZ
Posts: 180
|
AlleyKat, you'll need to call them for the install of the Trigger. It's not listed on the web site. He just told me about it over the phone. Besides, the Accu-Trigger has been out long enough for most people who own Savages to already possess them. Older savage owners probably would have dropped a Timney trigger in there by now. I was just too lazy and cheap to do mine. LOL.
As for the mistake on spelling, they're not the first to have typos.. and definitely won't be the last. LOL. I see them all the time on other web sites. Regardless, they seem to be good guys. I just called them the other day to order another Left Hand Tactical bolt handle and Bolt Lift Kit for my new Savage. I'll be sending up my pre-accutrigger 10FP in a few weeks. ===================== Kevin Rayhill, one of the principles, said that he does it all the time. It takes 20mins and costs $50 + shipping. This price includes the Accu-Trigger. Give them a shout! 308-432-5114 www.stockadegunstocks.com |
August 31, 2008, 06:42 PM | #11 |
Senior Member
Join Date: March 21, 2008
Location: Glendale, AZ
Posts: 180
|
FYI: I just contacted Kevin Rayhill and he says the turnaround time is about 4 days on installing Accu-Triggers. Give him a call. 308-432-5114.
|
September 1, 2008, 01:42 AM | #12 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
"...As for the mistake on spelling..." Gunparts lists No. 4 Lee-Enfields under SMLE too. A No. 4 Lee-Enfield isn't an SMLE. Mind you, so does Marstar and they should know better.
__________________
Spelling and grammar count! |
September 24, 2008, 07:26 PM | #13 |
Senior Member
Join Date: March 21, 2008
Location: Glendale, AZ
Posts: 180
|
I was on Fusion Firearms's web site and they were touting their Forged steel slides and frames. But the spelled FORGED as FROGED.. Ribbit!
|
September 25, 2008, 05:55 AM | #14 |
Senior Member
Join Date: October 17, 2007
Location: WI
Posts: 621
|
I put a Timney in my partner's 110. It was not hard at all.
|
September 25, 2008, 07:34 PM | #15 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
I installed the Rifle Basix on my 10 FP, but had one fire-on-closing event (as did a fellow with the factory trigger I was shooting with). Increasing the trigger weight seemed to cure the problem, but I never felt at ease with it again. Finally I replaced it with a Sharp Shooter Supply competition trigger (second item down here). They have two versions, one for the old style trigger (now only on Stevens rifles) and one to replace the AccuTrigger. If my rifle were new enough to have an AccuTrigger I would not replace that because of the safety feature built in. But for the old style, I definitely think it is worth the price of admission.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
October 1, 2008, 08:09 AM | #16 |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
2ndChance: As I said before, (and, of course, regardless of "brake") @ $50, retrofitting an older Savage with an Accutrigger is a bargain. As a matter of fact, it's almost too good to be true! If I owned an applicable Savage, it'd be on the way to those guys right now!
|
|
|