|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 21, 2009, 04:21 PM | #1 |
Senior Member
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
|
Ar 15 gas block conversion
Alright guys tell me the pros and cons of installing a gas system on my ar, and what is a good manufacturer to purchase the merchandise. Standard DPMS A3 upper, 223 or 5.56. Also what all do i need to purchase to make this conversion if i deem it cost effective or necessary?
|
November 21, 2009, 11:42 PM | #2 |
Senior Member
Join Date: August 24, 2001
Location: LC, Ca
Posts: 1,917
|
I don't understand your question.
AR-15 already have a gas system. Do you mean to convert from gas system to a piston system? |
November 22, 2009, 10:49 AM | #3 |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
The question, as posed, is fallacious, per DnPRK's post.
|
November 22, 2009, 10:50 AM | #4 |
Senior Member
Join Date: May 27, 2007
Posts: 5,261
|
While I don't like the current gas system on AR's/M4, I am not convinced that a bolt on gas piston system is materially better.
One guy reported having slamfires with winchester factory ammunition. That extra weight added to the carrier increased forward momentum. The soft WSR primer was going off as soon as the firing pin bounced off it. If the weapon system was being designed new, I would go with a gas piston. But modifying an existing design, I don't know. Bolt on's, adapters, etc, they have not seen as much field use or development testing as the existing system. Could be the cure, could be a problem. The current AR system is mechanically reliable, and if kept clean, will function adequately. It is more maintenance heavy than other designs, but just clean your rifle after you fire it and lube the heck out of it. |
November 30, 2009, 09:07 PM | #5 |
Senior Member
Join Date: February 1, 2009
Location: Southeast Texas
Posts: 137
|
Unfamiliar with ars
My original question after further research sounded really stupid. I'm new to ARs and didn't know the internal workings. Slamfire answered my question. I hunt in west texas and the arid conditions mean dust covers everything. Would a gas piston conversion be more suitable for this environment. After a five minute drive in our Rhinos or 4-whlrs everything is covered in an orange iron ore dust. And I was thinking of changing upper assemblies to a 243. Would this correct the slamfire problem?
|
December 1, 2009, 01:02 AM | #6 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,160
|
If your AR's currently shoot .223, .204, 6.8 SPC, 7.62x39, or anything along that line- you cant swap uppers to shoot the .243 ctg- that's in the AR-10 family. And, there's things you can fabricate to keep the dust down such as altering a small kids cold weather vest and sewing up the arm holes and such. But, if you live in places like we do- ya just learn to adapt.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
|
|