|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 24, 2019, 11:00 AM | #1 |
Member
Join Date: April 9, 2017
Location: Fairfax Station, VA
Posts: 63
|
Question: Aluminum Grips
Any comments pro or con about adding aluminum grips to a CZ 75? I know nothing about aluminum grips other than they are more expensive than walnut or G10. Thanks for responding.
|
May 24, 2019, 11:40 AM | #2 |
Senior Member
Join Date: August 25, 2007
Location: Indiana
Posts: 407
|
The aluminum grips can be made thinner than wood, and maybe somewhat thinner than G10, so if you want a thinner grip that can be the way to go. No worries about them cracking or splitting either. I put a set of aluminum grips on a CZ75 Compact and have liked them enough to sell the wood grips I had bought. They do have a different look and feel. I see that AlumaGrips is now offering grips for the full size CZ75, whose grips are you considering?
__________________
Support the Second Amendment Foundation and the Firearms Policy Coalition |
May 24, 2019, 01:37 PM | #3 |
Senior Member
Join Date: April 7, 2006
Posts: 10,985
|
Aluminum grips can feel cold. If they are anodized, bumps and scrapes will show up as bright white spots.
|
May 24, 2019, 08:42 PM | #4 |
Member
Join Date: April 9, 2017
Location: Fairfax Station, VA
Posts: 63
|
Aluminum Grips
Will certainly check on whether these aluminum grips are anodized before I buy them. Good info - thanks.
|
May 25, 2019, 01:14 AM | #5 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
I just worked on a SIG 1911 with SIG aluminum grips (standard, not thin grips). While very attractive (checkered and factory emblem as part of the grip design), they were heavy, and made the gun feel really heavy. Probably helps with recoil having that much weight low down on the frame. Maybe for bullseye or as a range gun, but I would hate to have to carry it on my belt.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
May 25, 2019, 07:20 AM | #6 |
Member
Join Date: April 9, 2017
Location: Fairfax Station, VA
Posts: 63
|
Aluminum Grips
Interesting - I would not have considered those 1911 grips to be manufactured from a heavy gauge aluminum. Were those grips thicker than the panel grips usually found on a 1911?
|
May 25, 2019, 02:12 PM | #7 |
Senior Member
Join Date: April 7, 2006
Posts: 10,985
|
Aluminum is heavier than wood, and heavier than some plastics.
My remark about anodizing also applies to paints like Duracoat, etc. |
May 25, 2019, 03:24 PM | #8 |
Member
Join Date: June 11, 2017
Posts: 34
|
I think G10 would be a more practical material.
|
May 26, 2019, 08:45 AM | #9 |
Member
Join Date: April 9, 2017
Location: Fairfax Station, VA
Posts: 63
|
Agree on the practicality of G10 material. I have G10 grips on my Colt 1911 and enjoy their feel, looks, and durability. Need to do a more in-depth comparison of G10 vs. aluminum grips.
|
May 27, 2019, 08:50 PM | #10 |
Member
Join Date: April 9, 2017
Location: Fairfax Station, VA
Posts: 63
|
Am going with the VZ/G10 grips. Thanks all for your insights.
|
May 27, 2019, 11:10 PM | #11 |
Senior Member
Join Date: January 7, 2008
Posts: 3,224
|
what is G10?
|
May 28, 2019, 10:55 AM | #12 |
Member
Join Date: January 12, 2013
Posts: 88
|
|
May 28, 2019, 01:12 PM | #13 |
Senior Member
Join Date: January 16, 2002
Location: alaska
Posts: 3,498
|
I used to have the thin grips on a 1911. I liked them, but as noted above, they are cold. And checkering would be a good thing, mine weren't.
They look great though.
__________________
"Every man alone is sincere; at the entrance of a second person hypocrisy begins." - Ralph Waldo Emerson "People demand freedom of speech as a compensation for the freedom of thought which they seldom use." - Soren Kierkegaard |
May 30, 2019, 01:31 PM | #14 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
"...Probably helps with recoil..." Really heavy steel grips were one of the many methods tried years ago on IPSC/pin shooting "race guns". Buddy on mine had a set on his 1911A1. Friggin' thing was like carrying a brick.
Al will be lighter due to the lower mass with the same thickness, etc. They're more expensive due to them being 100% machined. Colder than a witch's heart in winter just like an AL flashlight. Can't see any advantage or serious disadvantage(other than freezing your hand to 'em in winter. Like the kid's tongue on the fence post is The Christmas Story.) to 'em on any pistol myself. "...remark about anodizing also applies to..." Pretty much any finish. I think Birchwood Casey is still making Al Black.
__________________
Spelling and grammar count! |
May 30, 2019, 01:48 PM | #15 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
I have aluminum grips on only one of my handguns and it is one that has a lot of recoil. I like the look, I love the feel and as it isn't a carry gun, the weight isn't something I notice and if anything, it makes the experience better.
One thing that has NOT yet been mentioned with aluminum grips is that unlike wood, plastic or rubber, there is zero "give" whatsoever and this means that you can attempt to snug down the grip screws but they will loosen themselves regularly and without help, you can't stop 'em and it's royally annoying. A drip of thread lock works, but that's also annoying, in my opinion, so a better solution are rubber o-rings between the grip and the grip screws. This allows you a slight cushion to tighten down the grips screws where they (hopefully!) stay put. If I were outfitting a CZ-75 with new grips, I would head to Lok Grips and shop for hours and second and triple-guess my choices, as they have a mind boggling array and most are incredibly gorgeous. Very happy with the Lok Grips I bought for my CZ-75 TS.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
May 30, 2019, 08:27 PM | #16 |
Member
Join Date: April 9, 2017
Location: Fairfax Station, VA
Posts: 63
|
All good points, thanks.
|
|
|