August 26, 2010, 07:49 AM | #1 |
Member
Join Date: April 26, 2010
Posts: 26
|
Caps
Not sure what the difference between no.10 and no.11's. The no. 11's for my Rem. 1858 revolver need to be pinched to stay on. Does this mean I need to go to a no.10. Thinking about a buying a capper. Will a pinched cap work in a capper. Ken
|
August 26, 2010, 08:10 AM | #2 |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
It means that either you just need to try other brands of caps or replace your nipples with ones that are precision made like Treso bronze nipples.
You didn't specify what brand cap you are using. There aren't any industry standards for caps. So one brand will vary from another. Even within brands from one production run to the next there will be tolerance differences. I don't like the idea of pinching caps. "In a pinch" it will work but IMHO it isn't the proper or ideal implementation. If they are pinched then they are bowed and that doesn't make for an airtight sealed system. Will people who pinch caps experience an eventual chain fire? I don't know and I don't want to find out. The following pics show my observations on a few different caps I have used. Last edited by ClemBert; August 26, 2010 at 08:21 AM. |
August 26, 2010, 08:20 AM | #3 |
Senior Member
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,473
|
I would recommend using #10s with a capper. Push the #10s on well with the capper. I sometimes get a first try FTF with a #10 cap pressed on with my thumb. Usually fires on the second try. Pressing on firmly with a brass capper fixed the problem for me (I didn't really want to mess around with the hammer spring tension). Just make sure that the capper will fit in the narrow cutout around the nipple on your 1858 first. Some cappers won't fit.
__________________
Liberty and freedom often offends those who understand neither. |
August 26, 2010, 08:28 AM | #4 |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
If you don't get FTF with caps installed with just mere thumb pressure and you have to use a capper then you haven't found the right cap/nipple combination. I would suggest trying a different brand of caps or a different size within the brand you are using. And, Treso nipples go a long way to eliminate the problems some of y'all are experiencing.
|
August 26, 2010, 08:31 AM | #5 |
Member
Join Date: April 26, 2010
Posts: 26
|
caps
The caps that I am using are CCI Magnum Percussion Caps No. 11. Ken
|
August 26, 2010, 08:37 AM | #6 | |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
Quote:
You should pick up some Remington 10's and 11's and see how those work for you. Seriously, take the hint....look into Treso nipples. |
|
August 26, 2010, 09:03 AM | #7 |
Senior Member
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,719
|
Remington #10's. Period.
__________________
Sometimes the squeaky wheel gets replaced... SASS 47015 |
August 26, 2010, 09:35 AM | #8 |
Junior member
Join Date: August 4, 2010
Location: OK
Posts: 55
|
10s are smaller than 11s. you put 10s on a rifle it will take one hammer strike just to seat them.
11s on a pistol will fall off. |
August 26, 2010, 10:16 AM | #9 |
Senior Member
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,909
|
Well this thread is a little serendipitous! Today I'm ordering replacement nipples for my Pietta Colt 1860 because number 10s are too small and number 11s are too big. So I hot-footed it over to Track of the Wolf, which has AMPCO nipples in stock, but I want to be sure that I'm getting the right thing. I picked out the "Nipple, 6-.75mm metric thread, for replica Remington or Colt revolvers by FAP - Pieta, #11 cap, Ampco bronze". Correct?
And, since we're sort of on the subject, I'd like to replace the original nipple in my 1862 Colt contract Springfield rifle with a new one so that I don't pound the antique one to death. Track of the Wolf gives me too many options. I'm pretty sure that it's a 5/16-24 thread, but I'm not positive. Who wants to help me out?
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae |
August 26, 2010, 10:18 AM | #10 | |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
Quote:
|
|
August 26, 2010, 10:26 AM | #11 |
Senior Member
Join Date: February 25, 2009
Location: Idaho
Posts: 353
|
Hardcase, I just replaced all the nipples in my Savage Navy pistol for the same reason. Track of The Wolf suggested I try using original replacement nipples they have for Colt and Remingtion, they fit perfectly. I would go by their recommendation and if there's an assortment to choose from, order them all, they have no problem with returns or refunds. Good luck.
|
August 26, 2010, 10:54 AM | #12 | |
Senior Member
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,473
|
Quote:
__________________
Liberty and freedom often offends those who understand neither. |
|
August 26, 2010, 10:56 AM | #13 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
ClemBert. What gets confusing is that CCI #10 and #11 are the same height and #10 on most of the pistol nipples will be too tight while #11 which is larger with CCI will be too loose. With the Remingtons the #10 has a larger mouth opening but is longer than the #11. The nipples are tapered cones and how far up the nipple the cap goes determines fit. I find that the #10 Remingtons fit the best on most pistol nipples.
|
August 26, 2010, 11:04 AM | #14 |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
Fellas, I'm not trying to get into a debate over this. If y'all have a process that works for you then great. Continue to use it. I was merely pointing out that trying out different caps may be the best/first approach instead of using a bigger hammer (capper) to fix the problem. Additionally, I should say that there isn't a universal standard for nipple size on any of these firearms. Like caps there is probably a difference from manufacturer-to-manufacturer AND within a manufacturer depending on which lot the nipple comes from. Treso is one of the few nipples that I know of that try to hold very tight tolerances. The OP specified he has a Remington 1858. From that I don't know if it is an original Colt, an Uberti, a Pietta, ASM, et al. I assure you that all those makes do not have the same exact nipple. Therefore to say "#10 is the solution" or "Remington is good and CCI is bad" is not a helpful answer to help the OP understand what the best approach may be.
|
August 26, 2010, 11:36 AM | #15 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
The following chart has been published on this forum many times over the last few years.
It affirms ClemBert's observations (with the exception of the length of the Remington No. 10 - what's with that?) and has been verified to some extent on other forums. He's absolutely right about there being no standard either between manufacturers or even within a given manufacturer's catalog. You gotta specify both the number AND the manufacturer, and you CANNOT make any statements about relative size or fitness from one brand to another or from one size to another. |
August 26, 2010, 12:08 PM | #16 | |
Senior Member
Join Date: March 2, 2009
Location: Orlando
Posts: 936
|
Quote:
In the pic below, the Remington No. 11 is on the left, the Remington No. 10 is on the right, and the Winchester Mag No. 11 is in the middle. |
|
August 26, 2010, 12:10 PM | #17 |
Senior Member
Join Date: April 24, 2010
Location: Ohio
Posts: 581
|
Mykeal. That was a generalized observation on the #10 Remingtons. They work the best on both my Ubertis and Piettas with the least hassel. You are right there is no standard. The solution of buying Tresso nipples is a good one if you have one or two revolvers but at $36 a set if you have twenty revolvers it can get pricey.
|
August 26, 2010, 01:11 PM | #18 |
Senior Member
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,473
|
Clembert
Maybe I'm misunderstanding the OPs questions (perhaps he can clarify??). My interpretation is that he currently pinches #11 caps, and that works for him (but wondering if a #10 would be better). Now he's wanting to get a capper (not a big hammer to solve a small problem -- He just wants one!) and is wondering if pinched caps will work through it. My answer was that he may not need to pinch #11s because he'll be better able to press on #10s instead. I don't know if there will be an issue pressing on pinched caps from a capper, so I can't really answer that question.
**For me**, the most practical solution is the least expensive one that allows me to have the most flexibility and reliability with products available locally. I don't want to have to look all over town or online for the only percussion cap that works for my revolver-nipple-cap combination, today, and may not work tomorrow. I find that I can use ANY #10 cap on my Pietta 1858 revolvers if I take care to very firmly seat the cap, and this is done best and safest (for me) with a $12 capper.
__________________
Liberty and freedom often offends those who understand neither. |
August 26, 2010, 01:12 PM | #19 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
I think.....
....That the only chain fire event I ever experienced personally was because of a poorly fitting cap.
This was on a Brass frame Sheriff's 1851 pattern. I don't believe the problem had to do with the non battery cap banging against the recoil shield because: 1. It only happened once 2. I did have a tough time getting the caps to fit on the nipples I don't believe it came from the muzzle end, because: 1. The bullets were tight fitting...shaved a ring pretty much all the way around. 2. I greased all of the chambers as I always do.
__________________
Seek truth. Relax. Take a breath. |
August 26, 2010, 05:55 PM | #20 |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
The opening of #11 caps that are pinched are not uniform and may or may not get hung up in a capper.
Sometimes their lip will fold over when the attempt is made to slip them onto the nipple. It's probably best to try the #10's and if they fit too snug then the nipples can be dressed down a tad so that they will fit just right. They can be dressed by hand by carefully honing them with fine sand paper or a another polishing media. Then consider buying new nipples afterward if you're not happy with the results. |
August 27, 2010, 09:16 AM | #21 |
Senior Member
Join Date: February 25, 2009
Posts: 643
|
One of the reasons for buying the TRESO nipples has not been mentioned. That is the size of the flash hole is much smaller on the TRESOs. It restricts the amount of blow back through the flash hole thus allowing the caps to remain in place after firing.
I find that no matter how closely the hammer/nipple relationship is adjusted, after extended firing the nipple will start to mushroom on the end from the hammer strike. When I see my caps (#10 Remingtons) begin to split as they are forced onto the nipple I pull them out and do the following: I chuck the nipple by the threads into a cordless drill (lower RPM). I turn the drill on to a low speed and touch the swelled portion of the nipple to a fine file for a FEW revolutions. Usually all it takes is enough metal removed to leave a shiny shoulder on the nose of the nipple. Do not allow the flat nose of the nipple to touch the file as this would alter the hammer/nipple engagement. This slight taper also makes it easier to start the caps onto the nipples. |
August 27, 2010, 01:32 PM | #22 |
Member
Join Date: April 27, 2010
Posts: 93
|
I'm using standard Peitta nipples, which a Remington number 10 seems to fit well, however with the taller cap, none of them fit in any straight line capper I've tried so far.
Anyone know of a straight line capper that holds rem 10's well? |
August 27, 2010, 06:48 PM | #23 |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
My TDC dual spring straight line capper holds them just fine; although, I only use a revolver (snail) capper anymore.
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce |
August 27, 2010, 09:31 PM | #24 |
Member
Join Date: July 30, 2010
Posts: 32
|
I have tried all of them and one I have found to work the best is the RWS #11 caps. I have used them on Peitta colts for the last 8 years and they stay on and fit well. the only problem is they are quite pricey compared to the others.
Last edited by hanleyfan; August 27, 2010 at 09:38 PM. |
|
|