The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old August 25, 2001, 12:51 PM   #1
Senior Member
Join Date: October 11, 1999
Location: Miami Beach, FL, USA
Posts: 1,367
Berry's Bullets Questions

A few questions regarding Berry's (

1. Is this a reputable company? If I order from them, will my order come as described and quickly? Is the quality good?

2. What does "double struck" mean? What is the process, and what is the advantage? Is it the same price, and should I get double struck or regular?

3. Why are the 9mm hollowpoints the same price as the 9mm round nose? I always thought hollowpoints were more. Should I get roundnose or hollowpoints for target shooting? I know the round nose feed better, but I'd like to put some hollowpoints through my guns to make sure my defense ammo feeds fine.

4. Why are the 38/357 flat point and hollowpoint 125 grainers so much less than all the other 38/357 bullets? Is there a reason, or is is just cheaper because they make more of these?
branrot is offline  
Old August 25, 2001, 01:27 PM   #2
Senior Member
Join Date: February 21, 2000
Posts: 819
Well I can answer some of what you ask, yes, great
company,items are shipped on time,quality service.
I use their 9x18(mak) and 9mm, I like the 124grfp.
They are the most accurate I have found in 9mm.
I intend to use other cals they produce.
My guess on cost of 38 is the bigger the bullet
more cost. I have always used 158grswc in 38 for
But you can't go wrong on berry bullets.
bullet44 is offline  
Old August 25, 2001, 02:35 PM   #3
Senior Member
Join Date: December 5, 1999
Location: Seattle, Washington, USA
Posts: 1,686
Get the double struck Berry's bullets.

They are more accurate.

Otherwise buy the Rainiers.

Or if you'd like to shot at full FMJ velocities, get the West Coast since their plating is thicker than Rainiers and Berry's.
The Seattle SharpShooter - TFL/GT/AR15/SGT/PCT/KTOG/SWF/RF/HKPRO/OA2/1911Forum
Reloaded .223 Rem, 9mm, 40SW, 357 SIG, 10mm, 44 Spl, 44 Mag, 45 ACP Today?
jtduncan is offline  
Old August 25, 2001, 02:59 PM   #4
Senior Member
Join Date: November 20, 2000
Location: Ohio
Posts: 3,876
I can only answer one of your questions. Yes Berry's is a good company, they sell quality merchandise, deliver promptly and are very nice on the phone. I would suggest you just call them and ask them all these questions. Most of the answers on here will be pure speculation. I shoot West Coast bullets all the time, but I buy them from my local dealer and he only stocks certain sizes. By the way, Berry's is not that far away from me (neither is West Coast) and it is located in what I consider some of the most beautiful country I have ever seen.
You know the rest. In the books you have read
How the British Regulars fired and fled,
How the farmers gave them ball for ball,
From behind each fence and farmyard wall,
Chasing the redcoats down the lane,
Then crossing the fields to emerge again
Under the trees at the turn of the road,
And only pausing to fire and load.
444 is offline  
Old August 25, 2001, 05:12 PM   #5
Join Date: November 18, 2000
Location: Texas
Posts: 79
I use Berry's 124 grain flat points for my 357 SIG loads. I have not experienced any excessive fouling pushing the bullets at 1300 fps plus. I've always ordered from their website and delivery has been prompt.
Wayward is offline  
Old August 29, 2001, 11:06 PM   #6
Senior Member
Join Date: November 14, 1999
Posts: 1,573
Well ... I think you go the "thumbs up" on the company already ... but I'll add another resounding YES ... just 'cuz they are good! I'd rant if they weren't so it is only fair.

My experience is that you are basically buying lead by the pound from them. If you want heavier bullets, you pay for the extra lead ... I really think it is that simple.

Personally, I don't like the shape of their hollow points ... they tend to be really long, at least in the .38 and 9mm sizes.

I have used their .38/.357 in full house magnum .357 loads in excess of 1500 fps (way in excess!) and have never had a problem, but if I recall correctly, they drew the line at 1300 fps over the phone ... officially.

I've never asked for the double-struck versions and have never noticed them advertized in the calibers I shoot (.38/.357, 9mm, .40) ... so I can't advise that way, but my loads are at least as accurate as the Fiocchi or Hornady that I have used.

I wouldn't hesitate to jump into an order of 1000 of the round nose, truncated cone or flat point ... but I'd buy 250 of the hollow points to be sure that you like the shape though, before going for the GREAT prices of the 1000 boxes.

Hope this helps,
saands is offline  
Old September 1, 2001, 01:30 PM   #7
Senior Member
Join Date: March 19, 1999
Posts: 147
I just started ordering from them, but their quality is great, and their customer service is good as well.

I especially like the tumbler I got from them. In my opinion it was quite a deal and it performs very well.
Willy is offline  
Old October 21, 2001, 04:38 PM   #8
Join Date: August 7, 2000
Posts: 39
The West Coast bullets do not appear to have a thicker plating/jacket than the Berry's bullets. This afternoon I dissected both bullets. Plating in both cases measured .005 to .006" thick. Cheers, Cryoman
ICryoman is offline  
Old October 21, 2001, 09:47 PM   #9
Join Date: October 20, 2001
Location: Texas
Posts: 15
If you shoot them in a Glock watch for pressure. Plating sometimes works like lead and causes problems. I would try the West Coast brand first they come the closest to FMJ ammo. Last time I checked with my supplier Jacketed bullets were about $5 more a case. I think it's worth the $5. West Coast bullets are also proven in competition.

It's sounds like I'm am against Berry's and Ranier, but if you want a jacketed bullet use the real thing. By the way I use Montana Gold exclusively in 9mm and 40. In 45 I use lead, not enough pressure to worry about.

mike4045 is offline  
Old October 23, 2001, 12:32 AM   #10
Senior Member
Join Date: January 6, 2000
Location: AZ
Posts: 1,233
I ordered 500 Berrys 115gr rn double struck. Whenever I buy plated projos, I check weight and dimensions. The bullet weights were + or - 2grs, the O.D. was .355 to .359. Now, I don't know about you guys, but a .004 difference seems excessive for plated projos. West Coast never exceeded .0006 deviation in OD dimensions.

This might be something you all should look into before purchasing anybodies plated projos.

Waterdog is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07633 seconds with 9 queries