The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old October 2, 2013, 08:48 AM   #1
Junior Member
Join Date: October 1, 2013
Posts: 3
Repairing Spots on Shotgun Stock

I have a Winchester 50 shotgun, circa 1955, which has a very nice walnut stock. It had two spots of a tar-like substance that I removed with Goo Gone. Yes, of course, then I sanded just the spots with a 280 or so grit sandpaper. Now the spots won't take any stain or finish type product. They just sit there looking dull and grinning at me. I hate it when they do that.

I'm guessing I took too much or not enough of the finish off!? Mea culpa.

Please help. I know not what the original finish was. I doubt it was poly, maybe it was lacquer, but now I'm out of my league.


MajorNapalm is offline  
Old October 2, 2013, 05:52 PM   #2
Dixie Gunsmithing
Join Date: April 27, 2013
Location: Ohio
Posts: 1,923
Well, goop-off or goo-gone might have thinned the old finish enough that it soaked on down into the wood pours, I don't know. If the finish is gone, down to bare wood, then it should accept a finish, stain or varnish.

Winchester used a Linseed based oil finish, and a red-brown stain (just a touch of red). I think Connecticut Shotgun has the original formula, and offers small bottles for sale, since they make the 21 double now.

I have a like-new 50 feather weight, and I just looked at the finish on it to make sure, so the color and finish should be the same as your's.

Some folks don't like the 50, but I happen to be a big fan of them. IMO, they were well made. Winchester got a bad rap with the semi-autos they had before the 50, but the 50 worked.
Dixie Gunsmithing is offline  
Old October 7, 2013, 04:18 PM   #3
Junior Member
Join Date: October 1, 2013
Posts: 3
Thanks, Dixie, for your well thought out and helpful response.

I like the 50, too, because it has no cutie pie crap on it. It's just pure gun.
MajorNapalm is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04359 seconds with 9 queries