The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: General Handgun Forum

Thread Tools Search this Thread
Old April 5, 2013, 06:20 PM   #1
Senior Member
Join Date: September 11, 2012
Posts: 323
trigger pull weight of handguns

Does anyone know any web site that lists trigger pull weight of various handguns including revolvers? Thanks
chrisintexas is offline  
Old April 5, 2013, 06:31 PM   #2
Senior Member
Join Date: February 23, 2005
Posts: 12,895
No, not that I know of ...but its because there are too many variables...

Some mfg's websites -- like Sig Sauer....will tell you what the spec on the trigger pulls are...../ but while a gun you order may be close to the spec in the'll have to measure each gun / and I find it varies quite a bit + or minus 1/4 to 3/4 of a pound often....

A lot of us ....on higher end guns....will specify the trigger pull we want on a gun when we order it. Some mfg's, like Freedom Arms revolvers... will say their trigger pulls are typically 4.25 lbs...but if you want to pay for a honed action they will take it down to 3.0 lbs...or whatever you want in between when you order the gun.

Sometimes a good cleaning / changing the lubes or grease on a stock gun ...and/or changing the main spring, hammer strut spring on a gun can change the trigger pull as much as 1/2 or minus depending on what you want....

On older guns...even very collectable models of S&W revolvers or Colt revolvers....I find trigger pulls both double and single action are all over the board...
BigJimP is offline  
Old April 6, 2013, 06:52 PM   #3
black mamba
Senior Member
Join Date: September 13, 2011
Location: O'Fallon, MO
Posts: 714
I bought a used S&W model 57, 4" nickel back in the early '80s that had the best pulls I ever felt on a handgun. The single action was 2-3/4 pounds, and the double action was 8 pounds without any stacking, just a smooth pull through to letoff.

It was burglarized from my home about 20 years ago and never recovered.
black mamba is offline  
Old April 10, 2013, 09:02 AM   #4
Junior member
Join Date: March 10, 2013
Location: The Heartland
Posts: 174
Not to my knowledge but RK Campbell does and publishes his own trigger pull measurements. There are other independent researchers am sure.
LED is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:30 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.08461 seconds with 9 queries