The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Thread Tools Search this Thread
Old January 27, 2013, 02:44 PM   #1
Senior Member
Join Date: December 22, 2012
Location: NJ
Posts: 348
Sturdy safe door storage ideas?

I have a sturdy safe model 3224 with fire protection. I am just looking for ideas on what I can use to hang my pistols on the inside of the door. I like the door orginizer but I dont know if it will work on my safe. The safe door does not have carpeting on it so velco wont work I dont think.
All ideas welcome.
tynman is offline  
Old June 21, 2013, 09:59 PM   #2
Join Date: May 18, 2012
Posts: 16
Old thread but have the same question (larger sturdy safe though) so I figured I'd reply to this rather than start a new one . Anyone have any ideas?
Starting_Out is offline  
Old June 21, 2013, 10:19 PM   #3
Senior Member
Join Date: May 27, 2011
Location: Ohio-Kentucky - florida
Posts: 1,221
Sturdy safe door storage ideas?

You could glue fabric or marine carpet to door and use the Velcro door organizer or similar. If you have shelves inside you'll have to work your storage around those so the door will close. You could also cut sections of a old belt and secure to door to clip holsters on too?
Just a cpl thoughts really depends what you're wanting to store on door? Velcro is some wonderful stuff. Whether its dots, strips or patches
Garycw is offline  
Old June 22, 2013, 03:04 PM   #4
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 6,995
More than one way to skin this cat !!!

Fort Knox Safes, makes a holster type holder that has Velcro on one side. The inside liner is also covered in Velcro fabric that accepts the holsters. Not sure what your inside door panel is made of but is sheet metal. There is usually not problem in removing one and it does not interfere with the doors operation. .....

Now, my safe panel came with a velvet liners and plastic pegs. The pegs secures to the door by a S.M. self tapping screw. The peg, totally covers the screw. You caps that cover the screw heads from Home Depot. The Body of the peg, can be made from plastic clothes hanger. Cut each piece to about a 1-1/2" length. In short, you can make and install your own pegs. Let me know if you need more details....

Be Safe !!!
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  
Old June 23, 2013, 03:54 PM   #5
Join Date: May 18, 2012
Posts: 16
The safes interior is 10 gauge steel. I'm still awaiting delivery so I'm not sure about the clearances to the shelves with the door closed. I'd ideally like something like the amsec door organizer mounted to it but don't know if possible.
Starting_Out is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06484 seconds with 9 queries