|
|
|||||||
| Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
| Register | FAQ | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Search this Thread |
November 18, 2012, 10:19 PM
|
#1 |
|
Junior Member
Join Date: November 10, 2012
Posts: 1
|
load data for 45acp nosler 230g bullseye powder
cant find any good info for loading data for this flat nosed 230g 45 acp using bullseye was thinking 5.0 g , not sure about c.o.l.
thanks Tim |
|
|
November 18, 2012, 11:43 PM
|
#2 |
|
Junior member
Join Date: July 13, 2012
Posts: 179
|
For the 230gr RN, I use 5gr of Bullseye with CCI #300 Primers and seat at 1.255" with a taper crimp of .471". These shoot very well for me, I hope if you use this recipe, that they do the same for you.. Good Luck!
DASHZNT |
|
|
|
November 18, 2012, 11:50 PM
|
#3 |
|
Senior Member
Join Date: August 8, 2012
Posts: 2,556
|
C.O.L should be pretty uniform across all brands barring extreme loads like 105 grain A-Max .223 rounds...
|
|
|
|
November 19, 2012, 09:12 AM
|
#4 |
|
Senior Member
Join Date: January 13, 2010
Location: minnesota
Posts: 271
|
check handloads.com
i have used their advice as long as ther are under max loads. handloads has one load that sounds good to try. 230 gr ftx 4.9 gr Bullseye 850 fps 1.201oal Win LP primer Factory duplicat of 230 federal hydra-shok.Very Accurate.Another great IDPA load for CDP division.
__________________
nra member proud father and patriot |
|
|
|
|
|
