The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Thread Tools Search this Thread
Old November 2, 2012, 11:05 PM   #1
Join Date: December 29, 2011
Posts: 91
First AR?

hey guys, im interested in buying an AR-15, but i don't know what im looking for. I've never owned, or even shot an AR before, i only have mil-surp rifles. What is a good brand? What should i avoid? I'll probably buy used, but i need some direction. Thanks in advance.
zbones6 is offline  
Old November 2, 2012, 11:20 PM   #2
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
I'll probably buy used, but i need some direction.
If that's the case, perhaps you should buy from a LGS or private party where you can inspect and perhaps even shoot the gun. This is even more important if the gun has been assembled by the owner or seller from parts and is not a complete "brand" gun... i.e. lower is one brand, upper (which is seldom marked) is another, barrel yet another and so on. Buyer beware.

Safe bets for a guy on a budget are new guns being sold at discount prices from your local Walmart, Fred Meyer, what ever big box you got... etc etc. New, name brand rifles can frequently be had for $750 and less. At least you get a warranty from the Mfg.

You want a barrel marked .223/5.56 NATO or 5.56 NATO or .223 Wylde... not just .223 Rem. For twist rate a 1:7 has the broadest range of use, while a 1:8 or 1:9 will have slightly less heavy bullet capabilities. If heavy bullets aren't your thing, then 1:9 is nice.

I'm not going to start rattling off brands... there are too many good ones to choose from, especially entry level guns. A removable carry handle or flat top is the preferred upper. Barrel length and stock type are your call.

Shoulder Drive Nicholson Club
Creeper is offline  
Old November 3, 2012, 01:16 AM   #3
Senior Member
Join Date: January 28, 2012
Posts: 215
What's your budget? What's the intended purpose of the rifle?
djcantr is offline  
Old November 3, 2012, 03:57 AM   #4
Metal god
Senior Member
Join Date: April 10, 2012
Location: San Diego CA
Posts: 3,681
People come on here all the time and ask this very question so here are a few threads I found for you to take a look at . They ask pretty much the same questions and you should find the answer your looking for .

This is just few that cover everything from high end to low end as well as building your own and staying compliant with your states laws . you can always do your own search to find other threads that can answer your questions on new AR buying .

As for buying used I wouldn't . your not going to save that much money . there are alot of good ARs out there right now for well under $1,000 . some starting at $599 . The M&P sprot is one

smith & wesson M&P sport
Tolerate- allow the existence, occurrence, or practice of something that one does not necessarily like or agree with , without interference.
If you have some time IMO this is worth a listen/watch but it takes a few minutes to really get going . or a picture of Mohamed

Last edited by Metal god; November 3, 2012 at 04:05 AM.
Metal god is offline  
Old November 3, 2012, 07:08 AM   #5
Join Date: March 23, 2007
Posts: 77
Buy a complete one is good for your first. If you have friends with tools, you can build the lower and /or upper to save a little or to set it how you want.
hasbro_fan is offline  
Old November 3, 2012, 07:32 AM   #6
Join Date: October 25, 2012
Location: savannah, Ga
Posts: 22
If you want custom but don't feel like building it go to ranier arms you buy parts and they assemble it for little to no money

Sent from my HTC_Amaze_4G using Tapatalk 2
austinjunks is offline  
Old November 3, 2012, 06:02 PM   #7
Senior Member
Join Date: July 1, 2001
Posts: 3,736
I would buy a complete lower, complete upper with bolt carrier group.
Nathan is offline  
Old November 3, 2012, 07:40 PM   #8
Senior Member
Join Date: July 25, 2012
Posts: 755
Now this is true for MOST but not all. The "black rifles" quickly become an Buy the best that you can afford, but do your homework. Find the options (hand-guard length,barrel type & length, piston or DI..etc) you want and need. I have seen too many buy one then regret that they didn't get a mid length or quad rail equipped..

Listen to these guys on the forum, they know what they are talking about. Congratulations on your decision. I am sure it will be one you are glad you made.
" The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect
themselves against tyranny in Government.
..." - Thomas Jefferson
CharlieDeltaJuliet is offline  

ar-15 , assault rifle , m16

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05543 seconds with 9 queries