The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Thread Tools Search this Thread
Old September 12, 2012, 08:21 PM   #1
Junior Member
Join Date: September 7, 2012
Posts: 5
Umm.. My Sks trigger group is unsafe!

So I had my trigger group out of my Chinese Sks Monday to install the sear my buddy cleaned up for me and this is the issue I'm having now. when I reinstalled the sear, mag release and spring followed by the pin I was checking the operation holding it in my hand and when I pressed on the disconnector it was very stiff, no movement. I pressed a little harder and the hammer flew forward. I asked my buddy what he did and he said all he did was take light sand paper to the sear to smooth out the surface to help with the trigger pull. I let him do it because it made his trigger feel pretty smooth. Well I thought maybe he screwed up so I bought a brand new unissued sear and installed. Same problem. Did I do something on the reinstall or what? Please help!
Dal052181 is offline  
Old September 13, 2012, 07:15 AM   #2
Senior Member
Join Date: June 11, 2007
Location: Oklahoma
Posts: 409
Look on youtube or the survivors sks boards. I know I have seen links to pages and videos on how to work on the trigger group on the sks. Hope this helps you out.
What on god's green earth do you think your doing?
okiewita40 is offline  

sks , trigger

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:23 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04681 seconds with 9 queries