The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old August 17, 2012, 05:19 PM   #1
Join Date: August 28, 2010
Location: INDIANA
Posts: 62

My neighbor quit reloading shot shells because of age and physical problems. Gave me about 3 lbs of Reddot powder. I reload 40S&W, 38 special and 357 magnum, generally using Berry Bullets (plated) and shoot quite a bit. Anyone ever use this powder for this and if so, where did you find your load data. My manuals don't really show much. Thanks.
Old August 17, 2012, 06:02 PM   #2
Join Date: April 4, 2011
Location: Lawrence, Kansas
Posts: 65
Red Dot

Modern Reloading Second Edition by Richard Lee has info on Red Dot for the calibers you have.

I have only used Red Dot in 9mm, so have no experience with what you are doing.
GlenF is offline  
Old August 17, 2012, 06:12 PM   #3
Senior Member
Join Date: December 20, 2007
Location: S.E. Minnesota
Posts: 4,294
Red Dot will work in any cartridge; especially for light target loads. It will work really well in .38 Special, and not quite so good but usable in the others.
"The only way to stop a bad guy with a gun is with a good guy with a gun"
zxcvbob is offline  
Old August 17, 2012, 07:19 PM   #4
Senior Member
Join Date: September 21, 2008
Posts: 412
Red Dot and "Promo" powder

I used to use a lot of Red Dot.

If you can't find more data check out an older Lyman manual (#45 & #46). Those and a Speer from the same time period were the only manuals I had then.

These older manuals will not help you out with the .40 since they were printed before the .40 came out. The Lee manual also might have data.

Alliant has a powder called "Promo" which is basically a BULK ONLY economy version of Red Dot. You can interchange data WITH SLIGHT ADJUSTMENT check the Alliant website on how to adjust.

TimW77 is offline  
Old August 17, 2012, 09:34 PM   #5
Miata Mike
Senior Member
Join Date: May 22, 2010
Location: North East WI
Posts: 418
I loaded up a bunch of 158 grain LSWC bullets and Red dot powder in .38 Special. Very accurate mild load in my 6" Security six. Should be enough to load up close to 7000 .38 Specials!

Doesn't meter well being so flaky, but I loaded them up using my RCBS Chargemaster combo and my Lee turret press for some fun loads.
Miata Mike is offline  
Old August 18, 2012, 05:15 AM   #6
Senior Member
Join Date: December 31, 2011
Location: Vermont
Posts: 1,907
Here is the last paper manual published by Alliant:

Info you are looking for is on pages 42-43...You'll need to rotate the view of the pages...

Here is a bit more info of what Red Dot can be used for:
Salmoneye is online now  
Old August 18, 2012, 12:11 PM   #7
Join Date: August 28, 2010
Location: INDIANA
Posts: 62
Thanks everyone, especially SALMONEYE. I'll also check my Lee 2nd Edition. thanks again. HOOSIER

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06632 seconds with 9 queries