The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old June 1, 2012, 09:00 AM   #1
Junior Member
Join Date: April 1, 2012
Posts: 5
40 s&w open load info

I've searched and seached the net trying to find info for a good open load in 40 with little luck. So I figured I would ask here. Does anyone have a pet load for a open class 40. I am shooting a Glock 35 with a lone wolf barrel and a Carver 4 port comp. I want to find a flat shooting load that still makes major. This is setup is mainly for fun at my range and the monthly local match. Not looking to be a national competitor or anything so please don't tell me to sell it and get a 38 super or 9mm major. Just want helpful info for someone with a good flat shooting load. Thanks.
Speed_demonnat is offline  
Old June 1, 2012, 12:23 PM   #2
Senior Member
Join Date: June 12, 2010
Posts: 475
You'll probably get more pertinent 40S&W major load responses on Brian Enos forum -

These two threads may help:
BDS-THR is offline  
Old June 2, 2012, 04:51 PM   #3
Senior Member
Join Date: August 10, 2000
Location: WI
Posts: 1,303
165 gr plated over Universal, somewhere between 5.2 and 5.6 gr should work. Get the velocity over 1000, but keep it subsonic.
A plan is just a list of things that doesn't happen.
bedlamite is online now  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:15 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.08453 seconds with 9 queries