The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old April 25, 2012, 07:25 PM   #1
Senior Member
Join Date: September 28, 2008
Posts: 294
chamber casting with "sulphur sublimed"

Hello Forum Folks,

I just watched a chamber casting video on youtube (How to chamber cast: Excerpt from GunTech Video Magazine #48). The Smithy, Ken Brooks, showed how to do a chamber casting with a white powder agent called "sulphur sublimed" and it looked really neat/fairly easy how he did it. Has anyone on the forum tried this? My one question about it is, regarding measurements, does the sulphur casting hold the exact chamber dimensions for a long period of time after the casting is made? I've never done a chamber casting before, and I've heard that cerrosafe holds the exact chamber dimensions for quite a long period of time for measurement reference after the casting process. To anyone who has tried both techniques, how do the two methods compare?

Thanks for your time,

reinert is offline  
Old April 25, 2012, 07:53 PM   #2
Senior Member
Join Date: January 23, 2001
Location: People's Republic of Kanada
Posts: 1,652
I've never tried sulphur casting, but I believe most sulphur compounds are pretty brittle, and some of them can be fairly noxious as well; I've used Cerrosafe, and it is so simple to use, I can't imagine sulphur being any easier. If you can boil water, you can do a Cerrosafe cast, and it's reliable enough that you won't have any questions about the accuracy of your measurements.
Gun control in Canada: making the streets safer for rapists, muggers, and other violent criminals since 1936.
SDC is offline  
Old April 25, 2012, 09:22 PM   #3
Senior Member
Join Date: October 28, 2006
Location: South Central Michigan...near Ohio, Indiana.
Posts: 5,040
Some people used to use "Flowers of Sulphur" to make chamber casts. It is available, or was, from drug stores. However, it is just at melting temperature, it will cool to a solid, but if heated too hot, becomes a rubbery, translucent form that would be too soft to get a good reading from. Better to use Cerrosafe; it is almost ideal for chamber casts.
dahermit is offline  
Old April 26, 2012, 06:31 PM   #4
Senior Member
Join Date: September 28, 2008
Posts: 294
I'll probably just use the Cerrosafe when I get to the point of doing the project. I see the "sulphur sublimed" is readily available from a lot of internet sources, too. May even try that method; the process in the youtube video by Mr. Brooks looked so very easy to do. All he used was a cut-off aluminum pop can, a vise grips and a propane torch to do the job.

Thanks for the input,

reinert is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:00 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.12340 seconds with 9 queries