The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old February 18, 2012, 05:57 PM   #1
Junior Member
Join Date: February 18, 2012
Posts: 1
Kel-Tec P-3AT Problems

I have a P-31AT that I have had for about a year. I have not had any problems, but have only put a few rounds through it. Maybe a little over 100.

Yesterday I was out shooting my P-3AT and it quit firing. The trigger didn't seem to reset. (When I pulled it it moved without any resistance. Didn't connect with the hammer.) I worked the slide a little (did not pull completely back) and it fired again. This happend a couple of more times. The last time it fired I had to manually ejected the cartridge and strip a fresh one from mag. It never worked again.

Today I took the frame pin out and tried to remove the slide. It would go forward about 1/4 inch and stick. I tried this a couple of times and decided to put pin back in and send it back to KelTec. A little while later I thought I would give it one more try. This time the slide came off easily. I thought that the ejector had fallen out, but searched and searched for it. I was sitting in my computer chair when I took the slide off. I have determined that the ejector must be missing. I would have heard it drop and it is just not here.

Could the ejector have broken and fell out when I was out shooting yesterday? Will keltec send my one or do I need to send my gun in to them?

Thanks for any help!
Bama61 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04306 seconds with 9 queries