The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Thread Tools Search this Thread
Old November 26, 2000, 08:12 PM   #1
Junior Member
Join Date: October 13, 2000
Location: NoVA
Posts: 6
I've decided I don't like this internal safety in my 870 - so I ordered a Scatter Gun Tech replacement. I know how to drop the trigger assembly but don't see how to take out the safety - any idea's?
javentre is offline  
Old November 27, 2000, 12:34 AM   #2
Senior Member
Join Date: May 15, 1999
Location: waxahachie,Texas
Posts: 337

Yes,I just did mine and it was real easy.After you push out the two pins and drop the trigger assembly,there is a another small pin at the back,right over the safety. You will also have to push it out,but be real careful because there is a real small spring that goes down a hole. after you get this spring out the safety itself will push right out.Slide in the new one,put the spring back in the hole,reinstall the small pin over the safety and you are ready to go back together with the trigger assembly.I f you let that small spring fly out you may have a hard time finding it again. good luck. sj
sjones is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:38 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06739 seconds with 9 queries