Model 70 Post '64 parts

kraigwy · March 4, 2010, 10:52 AM

Where can I find an extractor, sping and pin, for a post 64 model 70 w/a mag bolt?

I checked Midway, Brownels and Gunparst corp.

Thanks

PetahW · March 4, 2010, 12:45 PM

Try Bob's Gun Shop (google).

.

Scorch · March 4, 2010, 04:11 PM

Try Jack First Guns for the extractor.
www.jackfirstgun.com

Numrich has the plunger and spring.
http://www.gunpartscorp.com/catalog/...spx?catid=7496

Bear Creek shows that they have them. Call to make sure.
http://www.parts4guns.com/

James K · March 5, 2010, 12:28 AM

Folks just can't resist those extractors. The first post-64 Model 70 I ever sold came back in two days with the extractor, plunger and spring missing. The owner had been "working the bolt when it just fell apart." The parts were hard to get and it took about a month, but his bolt never "just fell apart" again.

Jim

UpandAtIt · March 5, 2010, 11:12 AM

The below and MORE can be found at this link.... that also have sub links to the shops and mfgs.

http://www.wisnersinc.com/otherparts_sources.htm

FROM THEIR SITE:

Most replacement parts for the Winchester pre-64 model 70, many for the pre-64 model 94 & it's variations. Magazine tubes, plugs & rings for the Winchester lever guns. Magazine tube assemblies for the complete line of Winchester, Remington & Savage Rim Fire rifles. Many internal parts for the Marlin 1881, 1891, 92, 93, 94, 97,39, 39, 18, 20, 20S, 27S. The sole manufacturer for some of the most broken replacement parts for the obsolete Weatherby Centurion, Patrician, 82 & 92 shotguns. Replacement bolt assemblies for the Remington model 788 rifle. Replacement normally broken or worn parts for the Colt 1873, 1877, 1878, & some internal parts for the N, M, & S model pistols
Replacement magazines made on the original factory tooling for, Savage 340 222, 223 & 30-30. & Winchester model 88 & 100 magazine in 243 / 308 Win. & 284 Win
Coil spring ejectors for 1917 Enfields & P14s that have ejection port opened
NO WOOD OR BARRELS

Wisner's Inc phone 360-748-4590
PO Box 58 30page catalog $2.00 fax 360-748-6028
Adna, WA 98522 e-mail [email protected]
http://www.wisnersinc.com

_______________________

Replacement magazines made on original factory tooling for,

REMINGTON 511,513,521A, -- SAVAGE 35,65 --WINCHESTER 52,69,69A

Walter H Lodewick phone 503-284-2554
2816 NE Halsey
Portland, OR 97232
________________________

742 & 760 Receiver & bolt repair, 788 bolt handle repair

REMINGTON 742

Bear Creek Guns phone 509-697-9000
101 Sinclair Lane E e-mail [email protected]
Selah, WA 98942 http://www.parts4guns.com
________________________

Modifies 7mm-08 magazines for 6mm Remington, repairs bolt handles ,some 788 parts

REMINGTON 788

Chuck Lutz phone 215- 257-4059 (Evenings)
49 Bryant Drive e-mail [email protected]
Perkasie, PA 18944
_____________________

Manufactures replicas of the WINCHESTER low & high wall rifles.
Their parts interchange with the original.

Ballard Rifle and Cartridge LLC phone 307-587-4914
113 W Yellowstone Ave. e-mail [email protected]
Cody, WY 82414 www.ballardrifles.com
________________________

Replacement slide links & bolt buffers for ITHACA Mag 10

Laib's Gunsmithing phone 320-796-2686
North Hiway 23 e mail [email protected]
Spicer, MN 56288
________________________

Screws & pins for REMINGTON #1,#1 ½,#2,#4, Hepburn, Screws/pins for STEVENS 1894,1915 Favorites, 44, 44 ½, 044 ½ , Screws/pins for WINCHESTER 1885, Screws/pins for MARLIN BALLARD

Cedar Creek Screw & Machine phone 360-225-6448 7-10pm M-F
PO Box 1531 available most week-ends
Woodland, WA 98674 e mail [email protected]
________________________

Screws for WINCHESTER 12,61,62,70,86,90,06,92,94,97, Screw for REMINGTON 12, Screw for LUGER P 08, Screws for SPRINGFIELD 1873,1884, Screws for SPRINGFIELD 1903, Inside magazine tubes for MARLIN 39A,39M,81 (pre 1979), Inside magazine tubes for REMINGTON 12,121,24,241,512,550,552,572, Inside magazine tubes for SAVAGE 29A,29B--STEVENS Visable Loader, Inside magazine tubes for
WINCHESTER 90,06,61,62,200 Series, 9422

Popperts phone 215-887-2391
PO Box 413 fax 215-887-5816
Glenside, PA 19038 e-mail [email protected]
http://www.poppertsgunparts.com
________________________

Screws for WINCHESTER 12,61,62,70,90,06,97, firing pins for REMINGTON 740,742,760, Inside magazine tubes for REMINGTON 24,66,121,241,512,550, Inside magazine tubes for WINCHESTER 90,06,62, Aluminum safety for MOSSBERG 500

Pennsylvania Gun Parts phone 724-547-3257
RD 7 Box 150 e-mail [email protected]
Mount Pleasant, PA 15666
________________________

Outside magazine tubes (old style-obsolete) (5 sizes in all) for BROWNING 22 auto rifle

Terry Kopp phone 660-259-2636
Rte. 1 Box 224F Email [email protected]
Lexington, MO 64067
________________________

Magazine tubes for WINCHESTER 73,76,86,92,94 - MARLIN 93,94, mag. rings & plugs for both. Some screws for Win/Marlin. Toggle links Win 73

Eric Strand phone 612-447-5898
15051 Green Oaks Trail e mail [email protected]
Prior Lake, MN 55372
________________________

HI STANDARD parts and magazines

G W Elliott Inc phone 203-289-5741
514 Burnside Ave SASE for list
East Hartford, CT 06108
________________________

Screws for MARLIN 1881, 1889, 1893, 1894, 1895, Reproduction Marlin rear sight

Lever Action Rifle Co. (LARC) phone 503-665-9742
PO Box 1116 $1.00 FOR LIST
Gresham, OR 97030
________________________

Saddle rings and studs for WINCHESTER rifles

Goodwin Guns phone 207-365-4451
Sherman Mills, ME 04776
________________________

Steel (powdered metal) safety for MOSSBERG 500, 835, 5500, 9200, Front sight base for shotguns like REMINGTON 11

Wolf Creek Guns phone 814-786-9781
2395 Scrubgrass rd.
Jackson Center, PA 16133
________________________

Replacement coil & some flat springs for many firearms

W C Wolff Co. phone 610-359-9600
PO Box 458 fax 610-359-9496
Newton Square, PA 19073-0458 [email protected]
http://gunsprings.com
________________________

Wood gunstock manufacturer. Original issue-style replacement stocks for Winchester, Marlin, Colt, Stevens etc.
Also replacement steel butt plates

Precision Gun Works phone 830-367-4587
110 Sierra Rd. fax: 830-367-3361
Kerrville, Texas 78028 http://www.precisiongunstocks.com
________________________

Wood gunstock manufacturer. Over 900 different models to choose from

Great American Gunstock Co. phone 800-784-4867
3420 Industrial Drive e-mail [email protected]
Yuba City, CA 95993 http://www.gunstocks.com
________________________

Reproduction butt-plates, grip caps & pistol grips

NC Ordnance phone 252-237-2552
PO Box 3254 fax 252-243-9854
Wilson, NC 27895 e-mail [email protected]
http://www.gungrip.com
________________________

Reproduction butt-plates & pistol grips, over 800 different guns

Vintage Gun Grip Inc. phone 407-331-1324
853 Waterway Pl #117 fax
Longwood, FL 32750 e-mail
http://www.vintagegungrips.com
_________________________

Replacement obsolete magazines, rifle, shotgun & pistol

KKK phone 619-232-2066
2222 Commercial St fax 619-232-7675
San Diego, CA 92113 http://www.triplek.com
________________________

Ejection port covers for REMINGTON 742, 760 & Nylon 66 operating handles
BULK DEALER SALES ONLY

Fortmanns Gun Shop phone 320-732-2813
115 1st Ave. N e mail [email protected]
Long Prairie, MN 56348
________________________

xausa · July 15, 2014, 01:39 PM

After trying most of the above sources unsuccessfully I was able to find what I needed at:
Browning-Winchester Parts
3005 Arnold-Tenbrook Road
Arnold, Missouri 63010-4728
636-287-6800
Fax: 800-817-4755

Dixie Gunsmithing · July 16, 2014, 12:07 AM

There are a few making these as replacements. One guy was making new ones in his machine shop, and claimed to have modified the extractor profile so that breakage was minimized. I forget who that was, but he had a website, and I found it by a Google search.

Midway has the Callahan extractor for pre-64's.

http://www.midwayusa.com/product/515...l-in-the-white

Check here:

http://www.williamsfirearms.com/Index.htm

2ndsojourn · July 16, 2014, 09:31 AM

Hey Kraig,
It's been over four years, have ya found those parts yet?

March 4, 2010, 04:11 PM	#3
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Try Jack First Guns for the extractor. www.jackfirstgun.com Numrich has the plunger and spring. http://www.gunpartscorp.com/catalog/...spx?catid=7496 Bear Creek shows that they have them. Call to make sure. http://www.parts4guns.com/ __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

March 5, 2010, 11:12 AM	#5
UpandAtIt Junior member Join Date: February 14, 2010 Posts: 233	Great added sources for parts The below and MORE can be found at this link.... that also have sub links to the shops and mfgs. http://www.wisnersinc.com/otherparts_sources.htm FROM THEIR SITE: Most replacement parts for the Winchester pre-64 model 70, many for the pre-64 model 94 & it's variations. Magazine tubes, plugs & rings for the Winchester lever guns. Magazine tube assemblies for the complete line of Winchester, Remington & Savage Rim Fire rifles. Many internal parts for the Marlin 1881, 1891, 92, 93, 94, 97,39, 39, 18, 20, 20S, 27S. The sole manufacturer for some of the most broken replacement parts for the obsolete Weatherby Centurion, Patrician, 82 & 92 shotguns. Replacement bolt assemblies for the Remington model 788 rifle. Replacement normally broken or worn parts for the Colt 1873, 1877, 1878, & some internal parts for the N, M, & S model pistols Replacement magazines made on the original factory tooling for, Savage 340 222, 223 & 30-30. & Winchester model 88 & 100 magazine in 243 / 308 Win. & 284 Win Coil spring ejectors for 1917 Enfields & P14s that have ejection port opened NO WOOD OR BARRELS Wisner's Inc phone 360-748-4590 PO Box 58 30page catalog $2.00 fax 360-748-6028 Adna, WA 98522 e-mail [email protected] http://www.wisnersinc.com _______________________ Replacement magazines made on original factory tooling for, REMINGTON 511,513,521A, -- SAVAGE 35,65 --WINCHESTER 52,69,69A Walter H Lodewick phone 503-284-2554 2816 NE Halsey Portland, OR 97232 ________________________ 742 & 760 Receiver & bolt repair, 788 bolt handle repair REMINGTON 742 Bear Creek Guns phone 509-697-9000 101 Sinclair Lane E e-mail [email protected] Selah, WA 98942 http://www.parts4guns.com ________________________ Modifies 7mm-08 magazines for 6mm Remington, repairs bolt handles ,some 788 parts REMINGTON 788 Chuck Lutz phone 215- 257-4059 (Evenings) 49 Bryant Drive e-mail [email protected] Perkasie, PA 18944 _____________________ Manufactures replicas of the WINCHESTER low & high wall rifles. Their parts interchange with the original. Ballard Rifle and Cartridge LLC phone 307-587-4914 113 W Yellowstone Ave. e-mail [email protected] Cody, WY 82414 www.ballardrifles.com ________________________ Replacement slide links & bolt buffers for ITHACA Mag 10 Laib's Gunsmithing phone 320-796-2686 North Hiway 23 e mail [email protected] Spicer, MN 56288 ________________________ Screws & pins for REMINGTON #1,#1 ½,#2,#4, Hepburn, Screws/pins for STEVENS 1894,1915 Favorites, 44, 44 ½, 044 ½ , Screws/pins for WINCHESTER 1885, Screws/pins for MARLIN BALLARD Cedar Creek Screw & Machine phone 360-225-6448 7-10pm M-F PO Box 1531 available most week-ends Woodland, WA 98674 e mail [email protected] ________________________ Screws for WINCHESTER 12,61,62,70,86,90,06,92,94,97, Screw for REMINGTON 12, Screw for LUGER P 08, Screws for SPRINGFIELD 1873,1884, Screws for SPRINGFIELD 1903, Inside magazine tubes for MARLIN 39A,39M,81 (pre 1979), Inside magazine tubes for REMINGTON 12,121,24,241,512,550,552,572, Inside magazine tubes for SAVAGE 29A,29B--STEVENS Visable Loader, Inside magazine tubes for WINCHESTER 90,06,61,62,200 Series, 9422 Popperts phone 215-887-2391 PO Box 413 fax 215-887-5816 Glenside, PA 19038 e-mail [email protected] http://www.poppertsgunparts.com ________________________ Screws for WINCHESTER 12,61,62,70,90,06,97, firing pins for REMINGTON 740,742,760, Inside magazine tubes for REMINGTON 24,66,121,241,512,550, Inside magazine tubes for WINCHESTER 90,06,62, Aluminum safety for MOSSBERG 500 Pennsylvania Gun Parts phone 724-547-3257 RD 7 Box 150 e-mail [email protected] Mount Pleasant, PA 15666 ________________________ Outside magazine tubes (old style-obsolete) (5 sizes in all) for BROWNING 22 auto rifle Terry Kopp phone 660-259-2636 Rte. 1 Box 224F Email [email protected] Lexington, MO 64067 ________________________ Magazine tubes for WINCHESTER 73,76,86,92,94 - MARLIN 93,94, mag. rings & plugs for both. Some screws for Win/Marlin. Toggle links Win 73 Eric Strand phone 612-447-5898 15051 Green Oaks Trail e mail [email protected] Prior Lake, MN 55372 ________________________ HI STANDARD parts and magazines G W Elliott Inc phone 203-289-5741 514 Burnside Ave SASE for list East Hartford, CT 06108 ________________________ Screws for MARLIN 1881, 1889, 1893, 1894, 1895, Reproduction Marlin rear sight Lever Action Rifle Co. (LARC) phone 503-665-9742 PO Box 1116 $1.00 FOR LIST Gresham, OR 97030 ________________________ Saddle rings and studs for WINCHESTER rifles Goodwin Guns phone 207-365-4451 Sherman Mills, ME 04776 ________________________ Steel (powdered metal) safety for MOSSBERG 500, 835, 5500, 9200, Front sight base for shotguns like REMINGTON 11 Wolf Creek Guns phone 814-786-9781 2395 Scrubgrass rd. Jackson Center, PA 16133 ________________________ Replacement coil & some flat springs for many firearms W C Wolff Co. phone 610-359-9600 PO Box 458 fax 610-359-9496 Newton Square, PA 19073-0458 [email protected] http://gunsprings.com ________________________ Wood gunstock manufacturer. Original issue-style replacement stocks for Winchester, Marlin, Colt, Stevens etc. Also replacement steel butt plates Precision Gun Works phone 830-367-4587 110 Sierra Rd. fax: 830-367-3361 Kerrville, Texas 78028 http://www.precisiongunstocks.com ________________________ Wood gunstock manufacturer. Over 900 different models to choose from Great American Gunstock Co. phone 800-784-4867 3420 Industrial Drive e-mail [email protected] Yuba City, CA 95993 http://www.gunstocks.com ________________________ Reproduction butt-plates, grip caps & pistol grips NC Ordnance phone 252-237-2552 PO Box 3254 fax 252-243-9854 Wilson, NC 27895 e-mail [email protected] http://www.gungrip.com ________________________ Reproduction butt-plates & pistol grips, over 800 different guns Vintage Gun Grip Inc. phone 407-331-1324 853 Waterway Pl #117 fax Longwood, FL 32750 e-mail http://www.vintagegungrips.com _________________________ Replacement obsolete magazines, rifle, shotgun & pistol KKK phone 619-232-2066 2222 Commercial St fax 619-232-7675 San Diego, CA 92113 http://www.triplek.com ________________________ Ejection port covers for REMINGTON 742, 760 & Nylon 66 operating handles BULK DEALER SALES ONLY Fortmanns Gun Shop phone 320-732-2813 115 1st Ave. N e mail [email protected] Long Prairie, MN 56348 ________________________

July 15, 2014, 01:39 PM	#6
xausa Junior Member Join Date: March 4, 2007 Posts: 7	Model 70 Post '64 parts After trying most of the above sources unsuccessfully I was able to find what I needed at: Browning-Winchester Parts 3005 Arnold-Tenbrook Road Arnold, Missouri 63010-4728 636-287-6800 Fax: 800-817-4755

March 4, 2010, 10:52 AM	#1
kraigwy Senior Member Join Date: June 16, 2008 Location: Wyoming Posts: 11,061	Model 70 Post '64 parts Where can I find an extractor, sping and pin, for a post 64 model 70 w/a mag bolt? I checked Midway, Brownels and Gunparst corp. Thanks __________________ Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071

March 4, 2010, 12:45 PM	#2
PetahW Senior Member Join Date: September 19, 2008 Posts: 4,678	Try Bob's Gun Shop (google). .

March 5, 2010, 12:28 AM	#4
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	Folks just can't resist those extractors. The first post-64 Model 70 I ever sold came back in two days with the extractor, plunger and spring missing. The owner had been "working the bolt when it just fell apart." The parts were hard to get and it took about a month, but his bolt never "just fell apart" again. Jim

July 16, 2014, 12:07 AM	#7
Dixie Gunsmithing Moderator Emeritus Join Date: April 27, 2013 Location: Ohio Posts: 1,923	There are a few making these as replacements. One guy was making new ones in his machine shop, and claimed to have modified the extractor profile so that breakage was minimized. I forget who that was, but he had a website, and I found it by a Google search. Midway has the Callahan extractor for pre-64's. http://www.midwayusa.com/product/515...l-in-the-white Check here: http://www.williamsfirearms.com/Index.htm

July 16, 2014, 09:31 AM	#8
2ndsojourn Senior Member Join Date: January 15, 2013 Location: South Jersey Posts: 1,416	Hey Kraig, It's been over four years, have ya found those parts yet?