Remington Model 24 Stock Removal

sarge_3ad · January 13, 2009, 12:29 PM

How do I accomplish this? Is it by removing what looks like a spanner nut from around the mag tube?

Scorch · January 13, 2009, 02:19 PM

Yes, remove the stock draw nut from inside the stock. You will need to grind a socket so it has pins that will fit into the notches.

sarge_3ad · January 13, 2009, 03:05 PM

Thank you

January 13, 2009, 12:29 PM	#1
sarge_3ad Junior Member Join Date: January 13, 2009 Posts: 3	Remington Model 24 Stock Removal How do I accomplish this? Is it by removing what looks like a spanner nut from around the mag tube?

January 13, 2009, 02:19 PM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Yes, remove the stock draw nut from inside the stock. You will need to grind a socket so it has pins that will fit into the notches. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

January 13, 2009, 03:05 PM	#3
sarge_3ad Junior Member Join Date: January 13, 2009 Posts: 3	Thank you