The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old January 1, 2009, 07:10 PM   #1
Junior Member
Join Date: October 5, 2008
Posts: 2
need advice

i have a rifle that has small gouges on the outside of the barrel from it falling and i need to find the best way to fill in without requiring a welder since i do not have access to welding equipment
jamieg25 is offline  
Old January 1, 2009, 07:47 PM   #2
Senior Member
Join Date: February 4, 2006
Posts: 206
Jamie: You're better off to leave it as is. It could be draw filed and reblued if the appearance bothers you, but even tigg welding might do more damage than the fall did.
sadsack is offline  
Old January 1, 2009, 10:56 PM   #3
Senior Member
Join Date: February 9, 2008
Location: Puget Sound Washington
Posts: 1,552
What he said.... Heat bad...
"If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun." The Dalai Llama (5/15/01, The Seattle Times)
"That rifle on the wall of the labourer's cottage or working class flat is the symbol of democracy. It is our job to see that it stays there." George Orwell
Inspector3711 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:42 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06149 seconds with 9 queries