The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

View Poll Results: Who makes the best brass for handgun reloading?
Hornady 1 1.79%
Magtech 0 0%
Remington 2 3.57%
Speer 2 3.57%
Starline 28 50.00%
Winchester 14 25.00%
Other - please specify... 2 3.57%
Doesn't matter, all brass is equal! 7 12.50%
Voters: 56. You may not vote on this poll

Thread Tools Search this Thread
Old June 29, 2006, 06:13 PM   #1
Join Date: December 20, 2005
Location: Keystone State
Posts: 96
Best brass for handgun reloading...


Let's formalize this in a poll. Anyone who handloads or used to, please vote so we can see where the majority of us fall. Let us know why you voted how you did!
adephue is offline  
Old June 29, 2006, 06:21 PM   #2
Join Date: March 4, 2005
Location: Ohio
Posts: 14,067
Pretty much, for Rifles it is Lapua and Norma. I have measured .45 ACP in a number of brands, including military brass. Top Brass, made by Scharch is perhaps the most dimensionally consistent American-made pistol brass I've seen, with Starline close on its heels.

Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old June 29, 2006, 06:57 PM   #3
Join Date: January 16, 2005
Location: Miami, FL
Posts: 41
Amerc FTW!

Why wasn't Amerc listed! That is great stuff!

\sarcasm off
BigDog(RE) is offline  
Old June 29, 2006, 07:24 PM   #4
Join Date: April 30, 2006
Location: New Hampshire
Posts: 45
Federal fan here.
Live free or die isn't just a motto.
wixedmords is offline  
Old June 29, 2006, 10:23 PM   #5
Senior Member
Join Date: June 10, 2004
Location: Tioga co. PA
Posts: 2,545
best brass?

As a general thing I checked Winchester. In specific for My 30-06 I have a lot of Mil Surp. Lake City brass that I think highly of. I also have a bunch of Mil Surp. .45ACP brass that I have reloaded countless times. Now if you loading 30-06 and come across brass marked LC Match. OH MY!
rwilson452 is online now  
Old June 30, 2006, 08:10 AM   #6
Senior Member
Join Date: June 7, 2005
Location: Amarillo TX
Posts: 419
All seem to work well for my general day to day paper punching activities. I have tens of thousands of rounds of misc handgun brass that I have collected over the years, they all live together (seperated by cal ofcourse). I just scoop out what I need and load away, as they split, they get trashed. Probably 1 in 500 show fatigue, I throw them all in a bucket and when the bucket is full, I will seperate them out by headstamp, I have noticed no "real" trend. This is by no means a scientific method, but for general handgun shooting I dont notice much difference. If they will run a ragged 2-3" hole at 15 yds, thats good enough for me. I'm no kinda serious bullseye shooter, but those that are will have their own opinion.
A scalpel can be just as effective as a broadsword

Obviously, Occam was not a reloader
zeisloft is offline  
Old July 2, 2006, 11:15 AM   #7
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270

45 ACP = IMI

41 Action Express = IMI (utterly unable to wear it out)

9x21 = GFL

38 Super = Remington nickeled

357 Magnum = hmmmm, Winchester

41/44/45 Colt = Remington (only because its thin walls allow more room -- KABOOM!); in fact I prefer R-P cases for much development work simply because they show pressure signs sooner.....

45 Colt = Federal (see they're finally offering it as a component)

I currently use lots.........
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old July 2, 2006, 11:36 AM   #8
Ammo Junky
Senior Member
Join Date: March 11, 2006
Location: IL
Posts: 537
1st starline
2nd winchester

semi auto handgun
once fired mixed, I never find it any way

1st winchester
2nd remington

semi auto rifle
reloaded lc brass and bulk bullets
Will work for brass.

I apologise in advance for spelling errors.
Ammo Junky is offline  
Old July 5, 2006, 02:51 AM   #9
silicon wolverine
Senior Member
Join Date: April 28, 2006
Location: South dakota
Posts: 674
My wheelguns and target guns get starline. my autos get winchester. my AKs get whatever i can lay my hands on that goes BOOM

silicon wolverine is offline  
Old July 5, 2006, 04:33 AM   #10
Senior Member
Join Date: April 11, 2006
Location: Northeast Ohio
Posts: 3,403
I'm not picky about which brand of brass I get for .38/.357, but do not try reloading aluminum or steel shells. Those are meant to be cheap throw-aways, and should be regarded as such.
skeeter1 is offline  
Old July 5, 2006, 04:35 AM   #11
Senior Member
Join Date: March 5, 2006
Location: SW Florida
Posts: 435
I'm in tune with Zeisloft on this one.

Range pickups go in a (handgun) caliber specific bucket, random selection come reload time.

The plan is to shoot them until they split, but so far that's never happened; likely due to the sheer and growing number in the bucket and the "soft" target loads I use.

My favorite brand is "FREE".
Proud supporter of the NRA
mjrodney is offline  
Old July 7, 2006, 02:50 PM   #12
Senior Member
Join Date: February 8, 2005
Posts: 180
I said Winchester simply because that is what I buy when I have to. Most of the time I use what ever friends may have saved for me. It all gets looked over for problems though.
willsjeep is offline  
Old July 7, 2006, 03:44 PM   #13
Junior member
Join Date: September 28, 2005
Location: Mesa, AZ
Posts: 6,465
My favorite brand is "FREE".
azredhawk44 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.10116 seconds with 10 queries