The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old February 15, 2000, 04:58 PM   #1
Senior Member
Join Date: January 29, 2000
Posts: 709

Ahhhhhhhhhh! My 650 hates Varget!
I can load 748 in it all day without a hitch, but Varget,,little pieces of powder everywhere, stuck in shellplate, ect.

Is there a secret to this or am I just going to end up sizing, priming on the 650 and charging, seating with a Rockchucker?

I already called Dillon, not much help there.

Is anyone doing this *successfully*?
Nukem is offline  
Old February 16, 2000, 09:32 PM   #2
Senior Member
Join Date: October 29, 1998
Location: Colorado
Posts: 534
What caliber are you loading for? Does the Varget load fill more of the case? If so, that is most likely your problem. As the case "pops" off of the expander/powder charger, a load that nearly fills the case will tend to scatter some powder.
TaxPhd is offline  
Old February 17, 2000, 12:13 AM   #3
Senior Member
Join Date: April 25, 1999
Posts: 189
I load a lot of .223 with Varget on a 550B. The trick is to tap the powder measure firmly with your left hand while the ram is all the way up. That ensures that all the powder drops at the right time. After a few times, it becomes second nature.
pbash is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 09:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05577 seconds with 9 queries