The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Thread Tools Search this Thread
Old July 27, 2005, 12:25 PM   #1
Junior Member
Join Date: July 26, 2005
Posts: 7
Navy Arms Schofield cleaning

I shot my new Navy Arms Schofield for the first time today and I would appreciate any information as to the proper method to disassemble and/or properly clean this top break pistol. No info was included with purchase.

If this is the wrong forum, could someone direct me to a site where this information exists.

Sorry for the cross post if that is bad form.

96eunos is offline  
Old August 16, 2005, 09:19 PM   #2
James K
Join Date: March 17, 1999
Posts: 24,129
There is not much to it, but I goofed up an answer a while back.* The cylinder is removed by removing the rear screw in the block on the top strap, then tipping the block up to remove the cylinder. After that, the cylinder and barrel can be cleaned easily. Further disassembly is not recommended, though the hinge screw can be removed and the barrel separated from the frame if really necessary.

*I said that both the screws in the block needed to be removed - not true.

Jim K
James K is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:22 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2016 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04103 seconds with 9 queries