The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Thread Tools Search this Thread
Old April 24, 2005, 11:09 PM   #1
Junior Member
Join Date: April 24, 2005
Posts: 1
Savage 99 + .410 barrel

I have a Savage model 99 takedown, in 30-30, made in 1920. It was my grandfather's and has seen heavy use in the woods of Maine. I know the barrel and butt stock have been replaced due to wear. It has the shotgun butt plate but I'm not sure which exact model it is. It also has a cartridge counter and straight stock. My main difficulty is with the additional .410 barrel. It has a screw that looks like it should anchor in the fore stock but it doesn't look right. I could be missing a part. Does anyone have any info that might help?
TBGumby is offline  
Old April 24, 2005, 11:33 PM   #2
Mike Irwin
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 39,339
It's probably either a 99F, which had the straight stock, as opposed to the 99G, which had the delux stock with a pistol grip. It could be part of a cased set, but Savage apparently didn't sell many of the cased sets.

The serial number will probably be between 200,000 and 398,000 or so.

I've not seen one of these in a couple of years, but IIRC you would screw the .410 barrel into the frame, put the forearm in place, and then use the sliding screw bolt under the .410 barrel to clamp the forearm into place.

Remember, these barrels are chambered for 2 and 1/2" shells ONLY. Use of 3" shells could damage the gun.

Also, I'd advise not swapping barrels all that often. It can be hard on the barrel/receiver threads, and once they become wobbly due to wear there's no easy way to take up the slack.
Mike Irwin is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:01 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05148 seconds with 9 queries