The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Hunt

Thread Tools Search this Thread
Old August 10, 1999, 09:45 PM   #1
Rich Jone
Join Date: July 2, 1999
Posts: 22
I bought a High Country Split Force XI last year from Cabela's & had to return (2) before settling with the 3rd identical bow. Cabela's returns department was great, however, I am not too fond of the quality of High Country bows.
I returned the first bow because the threads stripped when I tried to screw on the stabilizer onto the riser.
I returned the second bow because I stripped the threads on one of the attach holes in the riser which hold the lower portion of the quiver to the bow.
It appears that the threads in the riser are not tapped completely at the factory along with the fact that the material from which the riser is made of appears to be an extremely low grade of aluminum. I have a (10) year old PSE Mach Flite IV which is just great but weighs a ton. I have never had a problem with it before, but just wanted to upgrade to a faster bow.
Does anyone out there on TFL have/had a similar problem with their High Country bow? Thanks for your input in advance.
Rich Jone is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 08:11 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04016 seconds with 9 queries