The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old March 19, 2005, 06:50 PM   #1
Junior Member
Join Date: March 19, 2005
Posts: 2
Loading 44 mag for 1440fps

I am setting up a test bed using a Thompson Contender frame. I need to fire 230 grains at 1440fps with the min. variation in speed. I will be buying a new custom barrel. Is there a way to determine the best length?
randyhill is offline  
Old March 19, 2005, 07:35 PM   #2
Senior Member
Join Date: May 12, 2002
Location: MO
Posts: 5,206
I've been loading "Elmer's Baby" for a long time, and I've never run across 230 grain .44 bullets; but it is also that long experience which tells me that there are so many components for this cartridge that I may not have seen them all yet!

From the tone of your post I'm betting you will have a chronograph handy for your experiments, so it's a simple matter of selecting a slow powder like H110 or W296, commencing with the "starting loads", and then easing your way up to the velocity you are trying to attain- watching for pressure signs along the way. I believe I would use the 14" Contender if I were you, although you should have no trouble getting 1440 fps from the 10" tube, either.

The following should help you get started, I hope-

Please let us know how it all works out. I am always willing to learn something new about this fine cartridge.
May a person who is relocating out-of-State move firearms with other household goods? Yes.
Sarge is offline  
Old March 20, 2005, 11:13 AM   #3
Junior Member
Join Date: March 19, 2005
Posts: 2
S/b 240

Can't type. I am using Remington 240 Grain Semi-Jacketed Hollow Points.

Thanks for the advice and I will follow the link.

randyhill is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 10:23 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05354 seconds with 9 queries