The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old August 24, 2004, 04:41 PM   #1
Join Date: August 12, 2004
Posts: 16
Newbie reload questions: Tumbler

I've receintly started shooting IDPA, and am thinking I should try some reloading. I have collected several hundred brass in 9 mm. The only thing I have thus far is an old Lortone Compact Lapidary Tumber, without a drum. Can I just get a cylindrical plastic bottle to use to tumble in?

The motor says: "#20 NON-DET OIL EVERY 3 MO." I'm assuming that means I should oil the motor every 3 months. What do they mean by #20 non-det oil? Where could I get it? Where should I oil?

How much media vs how many brass should I use? How much empty space should I leave? I'm planning to start with either rice or walnut media purchased at the pet store. Any preferences?

A non tumbler question: Are dies interchangeable between the different brand presses? I have a family friend with a press that I can probably use if I were to buy the dies. Would I be locked into that brand of press?

Thanks for your advice,

Airsmithy is offline  
Old August 24, 2004, 05:35 PM   #2
Jim Watson
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 14,160
Well, the FIRST thing you need is a good handbook. Lyman is good.

I don't know about the care and feeding of a Lortone, except that #20 non-det oil means SAE 20 non detergent motor oil. I'd try it about 1/3 full of walnut media and some brass.

Almst all loading dies are the same 7/8x14 thread (and T-slot shellholder) introduced by the old Pacific company many years ago. The only modern exception is the Dillon Square Deal B. There might be a few old Lyman presses with the little 5/8 inch dies still in use. Ask the friend, he ought to know what he has. If he doesn't, do you really want to be working with him?
Jim Watson is offline  
Old August 24, 2004, 06:22 PM   #3
Senior Member
Join Date: July 1, 1999
Location: Iowa
Posts: 2,135

Your rock tumbler will work, but it's gonna be kinda slow. Enough media to fully cover all the brass is the right amount. Not sure what a replacement drum will cost you, but has new tumblers for around $50. They come with a lifetime warranty and work great.

Good Luck...

JoeHatley is offline  
Old August 27, 2004, 10:51 PM   #4
Paul Fitz Jones
Senior Member
Join Date: June 12, 2002
Location: Sacramento California
Posts: 266

I was a LORTONE DEALERa long time ago and if it is the 12 pound size they are the quietest made and used wet in tide soap or dry. Look up Lortone on the internet as they still exist and I love mine.
Paul Fitz Jones Retired and Loving It
Industry Manufacturer
Police Firearms Instructor
Paul Fitz Jones is offline  
Old September 2, 2004, 09:06 AM   #5
.45 Vet
Senior Member
Join Date: May 21, 2004
Location: Western Penn.
Posts: 377
# 20-Non-Det

20 Weight, non detergent oil. A few drops'll do ya...
For those who've never fought for it, the price of freedom shall never be known...
.45 Vet is offline  
Old September 5, 2004, 10:35 AM   #6
Senior Member
Join Date: May 11, 2000
Location: lower rio grande valley, texas
Posts: 216
as to the 'where' - oil the bushings (or bearings, as the case may be).
look for some little oiling holes at the ends of the motor case where the armature (spindle) passes thru.
If you would have Liberty you must accept that individual security
is not the responsiblity of government. You must. - XAVIER ONASIS
shu is offline  
Old October 24, 2004, 04:22 AM   #7
Junior Member
Join Date: October 24, 2004
Posts: 2
Inexpensive NEW tumbler

The last Harbor Freight catalog I looked at had a 3lb rock tumbler for (I think) $19.95.

I think a double-tumbler was $29.95 ...

Look at

I've bought a lot of great stuff from them.
Shipping on orders over $50 is free but, they use something like 4936th-class mail and delivery usually takes 2-1/2 - 4-1/2 weeks.

However, you can buy a 50lb anvil for $25 - add a couple of things to make up $50 and, they will ship it free!

If you're in a hurry and, just need a tumbler or two, you might want to pop for postage

JonW is offline  
Old October 24, 2004, 04:33 AM   #8
Junior Member
Join Date: October 24, 2004
Posts: 2
Both tumblers are $29.99

I went and looked (which I shoulda done in the first place )

The 3lb is $29.99 and the dual drum (two 3lb drums) is on sale - also for $29.99.
JonW is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2017 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.12040 seconds with 9 queries