View Single Post
Old June 4, 2012, 01:22 PM   #23
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 13,195
Many "gas guns" will not operate reliably with shells that have a velocity under 1200 fps...( which is roughly a 3 Dram Equivalent shell )....and whether the payload is 1 oz or 1 1/8 oz won't matter.

You need to do a lot more reading / understanding before you just jump into this press....but if you have a WAA 12 wad - then its for 1 1/8 oz shells / if you drop down to a 1 oz load you'll need a WAA 12SL wad.

Hodgdon Clays is a good 12ga powder...

WIN 209 primers are fine ...
------------
I suggest you dump the Estate hulls ....and start with some Remington STS or Remington Nitro ...or Remington Gun Club hulls.../ and stay with one of those hulls - get the loader set up properly, cleaned, lubed - and adjusted so its giving you good crimps with those hulls.

Most of us just stay with one hull.

Many shooters reload Remington 12ga hulls...and if you ask around at your club ...a number of guys might just donate 250 hulls to you ( from their inventory ) to get you started. Most of us have more 12ga hulls - that we'll use up in 3 lifetimes....

(and welcome to this side of the hobby ! ).
BigJimP is offline  
 
Page generated in 0.02228 seconds with 8 queries