View Single Post
Old January 19, 2000, 03:34 PM   #3
Senior Member
Join Date: December 6, 1999
Location: Fort Atkinson, WI USA
Posts: 143
Well, a good question.

My 1100 can be unloaded by cycling the receiver, to eject the one in the chamber, I then drop out the one that just ejected from the magazine tube thru the port (so I have now removed the one in the chamber and the next one to go in the chamber), then I press the latch on the bottom port, it cycles the receiver, when I pull the receiver back the next round from the magazine is ready to be chambered, only I drop it out the port and repeat as necessary. (similar to pump as already posted.)
( but I can stop here when waterfowl plug is in gun , cause it only takes 3 then!)

I don't think I can recommend the 1100 as HD, but your question asked how to unload a self loader without chambering every round.
hope this helps,
gfrey is offline  
Page generated in 0.03010 seconds with 8 queries