The Firing Line Forums - View Single Post - Using Tung Oil to Finish Walnut Stock & Sanding

Scorch · September 10, 2010, 12:42 PM

Yes, you can sand over those areas. That roughness is called "whiskers", and they raise up whenever you get sanded wood wet. The only way to get rid of them is to sand them off. Try 320 first, then sand lightly with 400. Then more finish, let it sit several days, then repeat until you get the depth of finish you want, generally 8-12 coats with tung oil.

September 10, 2010, 12:42 PM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Yes, you can sand over those areas. That roughness is called "whiskers", and they raise up whenever you get sanded wood wet. The only way to get rid of them is to sand them off. Try 320 first, then sand lightly with 400. Then more finish, let it sit several days, then repeat until you get the depth of finish you want, generally 8-12 coats with tung oil. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services