The Firing Line Forums - View Single Post

Scorch · May 23, 2013, 12:18 AM

I wouldn't. I had a similar project a few years ago, I wanted to rebarrel a Rem 580 to 218 Bee. When I did the calculations, it was obvious I should not do it, bolt thrust was 5 times as high with the 218 Bee, and since the action was not heat treated its strength was unknown. I ended up building a 17 HMR single shot instead. I think I made the right choice, I like my eyes and fingers right where they are. I'll build a Low Wall in 218 Bee instead.

May 23, 2013, 12:18 AM	#5
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	I wouldn't. I had a similar project a few years ago, I wanted to rebarrel a Rem 580 to 218 Bee. When I did the calculations, it was obvious I should not do it, bolt thrust was 5 times as high with the 218 Bee, and since the action was not heat treated its strength was unknown. I ended up building a 17 HMR single shot instead. I think I made the right choice, I like my eyes and fingers right where they are. I'll build a Low Wall in 218 Bee instead. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services