View Single Post
Old April 6, 2015, 07:25 PM   #3
steveNChunter
Senior Member
 
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
Sounds like the magazine follower is getting bound up/crooked. Unload the rifle, turn the rifle upside down, loosen the action screws, lift the stock off the barreled action, and slide the magazine spring and follower in and out of the magazine while squeezing the back of the magazine together. If it slides in and out freely, then put it all back together ensuring that the follower spring is straight. Then if it still doesn't work properly, I'd get a new magazine follower spring. Should be less than $10 from somewhere like MidwayUSA.

Here's a picture of the parts I'm referring to:

PS- You're probably already doing this but make sure you are pushing each round all the way to the back of the mag as you load it.
__________________
DEO VINDICE

Last edited by steveNChunter; April 6, 2015 at 07:32 PM.
steveNChunter is offline  
 
Page generated in 0.02373 seconds with 8 queries