View Single Post
Old March 15, 2009, 07:33 PM   #4
Ulrice
Member
 
Join Date: February 14, 2008
Location: Langley, BC, Canada
Posts: 95
your rifle might need some pressure exerted on the barrel by the end of the forend of the stock. You could try wedge a thin piece of cardboard between the barrel and the stock and see if that changes consistancy. The only other thing I can think of is that you may have a flinch. Good luck.
Ulrice is offline  
 
Page generated in 0.02494 seconds with 8 queries