The Firing Line Forums - View Single Post

mikld · March 29, 2012, 03:00 PM

Having been a machinist/mechanic/electrician for the last 30 years I had a tool on hand for this job; a 60 degree countersink. I have a few left and use one that has a hex shank in mt electric screwdriver. Hold screwdriver in right hand, left hand reaches into bucket for brass, push brass against countersink mebbe 1 second, drop brass into "finished" bucket. I've done about 1k 5.56 and a bunch of 45 ACP...

March 29, 2012, 03:00 PM	#17
mikld Senior Member Join Date: February 7, 2009 Location: Southern Oregon! Posts: 2,891	Having been a machinist/mechanic/electrician for the last 30 years I had a tool on hand for this job; a 60 degree countersink. I have a few left and use one that has a hex shank in mt electric screwdriver. Hold screwdriver in right hand, left hand reaches into bucket for brass, push brass against countersink mebbe 1 second, drop brass into "finished" bucket. I've done about 1k 5.56 and a bunch of 45 ACP... __________________ My Anchor is holding fast! I've learned how to stand on my own two knees...