View Single Post
Old July 17, 2018, 06:21 AM   #7
ligonierbill
Senior Member
 
Join Date: May 20, 2007
Posts: 1,557
A Quickload run says IMR-4064 is too slow. You will run out of case capacity before you reach the round's potential. Hornady did not test IMR-4064 with 60 gr Vmax. Good suggestions in this thread. I use Ramshot TAC and Hodgdon CFE223 with good results. Hornady got their best velocities with CFE223 and BL-C(2). CCI 400 are fine. If you go with BL-C(2), you might try CCI 450.
ligonierbill is offline  
 
Page generated in 0.02935 seconds with 8 queries