View Single Post
Old December 3, 2019, 09:55 PM   #23
mehavey
Senior Member
 
Join Date: June 17, 2010
Location: Virginia
Posts: 5,529
So far, sizing only a thou [from .358 --> .357 w/ starline brass] the Speer 180 has worked superbly well.
In the 190-200 cast range, the classic Lee 358-200GC sized 0.358" is also a ready made fit.

As far as sizing/shooting .357 cast (thinnest ALOX coat) leaves an absolutely mirror-finish bore at 37/38,000 psi

Last edited by mehavey; December 3, 2019 at 10:30 PM.
mehavey is offline  
 
Page generated in 0.02754 seconds with 8 queries