The Firing Line Forums - View Single Post

mikld · September 15, 2012, 12:45 PM

I understood right away! Fine ball powders can leak outta the side of the drum of a Lee Perfect Powder Measure. I have used my Lee with .223 and the drop tube fits fine, no leaks there.I have put some graphite in/on the drum, tightened up the drum fit (screw on right/handle side) and worked the handle for a few minutes. Helped some. You can lap the drum with a bit of lapping compound. Or ignore it. I use WC820 for my .44s and the leaks are an irration, but the drops are consistant. When I have to use my Lee, I just catch the spill on a sheet of paper under the measure and return it to the jug...

September 15, 2012, 12:45 PM	#7
mikld Senior Member Join Date: February 7, 2009 Location: Southern Oregon! Posts: 2,891	I understood right away! Fine ball powders can leak outta the side of the drum of a Lee Perfect Powder Measure. I have used my Lee with .223 and the drop tube fits fine, no leaks there.I have put some graphite in/on the drum, tightened up the drum fit (screw on right/handle side) and worked the handle for a few minutes. Helped some. You can lap the drum with a bit of lapping compound. Or ignore it. I use WC820 for my .44s and the leaks are an irration, but the drops are consistant. When I have to use my Lee, I just catch the spill on a sheet of paper under the measure and return it to the jug... __________________ My Anchor is holding fast! I've learned how to stand on my own two knees...