The Firing Line Forums - View Single Post

Theohazard · January 28, 2018, 02:17 PM

I don't own an Omega, but that's one of the first issues I noticed with it when I first played with one. I also noticed that SilencerCo added wrench flats on the inside of the direct-thread mount, so they obviously know this is an issue and they wanted to make it easier for you to remove the mount if the silencer comes off and leaves it stuck on the barrel.

Call SilencerCo and ask what they recommend. They have excellent customer service. I would think that a small drop of Rocksett on the threads between the mount and the silencer body would do the trick without locking it on too tight, but ask their advice first, they might have a better idea.

January 28, 2018, 02:17 PM	#2
Theohazard Senior Member Join Date: April 19, 2012 Location: Western PA Posts: 3,829	I don't own an Omega, but that's one of the first issues I noticed with it when I first played with one. I also noticed that SilencerCo added wrench flats on the inside of the direct-thread mount, so they obviously know this is an issue and they wanted to make it easier for you to remove the mount if the silencer comes off and leaves it stuck on the barrel. Call SilencerCo and ask what they recommend. They have excellent customer service. I would think that a small drop of Rocksett on the threads between the mount and the silencer body would do the trick without locking it on too tight, but ask their advice first, they might have a better idea. __________________ 0331: "Accuracy by volume." Last edited by Theohazard; January 28, 2018 at 02:30 PM.