View Single Post
Old March 25, 2020, 09:57 PM   #1
Pbaker29
Junior Member
 
Join Date: March 25, 2020
Posts: 1
Breech face impact marks

I recently noticed impact marks on the breech face, and it appears to be from the bolt. I had a stoppage during my last shooting session. The round failed to fire, and failed to eject. I cycled the bcg several times in an attempt to eject the round. I'm honestly not sure what the issue was with the round, but I did eventually get it out. I fired roughly 20-25 rounds afterwards with no issue.

After getting home and cleaning the rifle, I noticed impact marks from the bolt on the breech face, and what appears to be some scratches on the chamfer area around the chamber (I assume it is damage from the stuck round). What I'm not sure about is how the bolt marks got on the breech face. Is this cause for concern? It seems to cycle and function. I would venture to say it functions flawlessly if it weren't for the stuck case. It has never malfunctioned before thru almost 1,000 rounds (knock on wood).

Also, bolt looks to be just fine.

Anyhow, any advice?
Attached Images
File Type: jpg 0325202007_HDR.jpg (202.7 KB, 98 views)
File Type: jpg 0325202004.jpg (111.6 KB, 93 views)
Pbaker29 is offline  
 
Page generated in 0.03624 seconds with 9 queries