|
I generally free float all my barrels and bed the front and rear of the action plus recoil lug. To bed the action, use only the front action bolt. Wrap tape around the barrel at the front of the stock to keep the barrel from pulling down and lifting the rear tang at all. Fill the rear tang bolt hole and the top of the hole in the stock. I use a drill the drill small shallow hole's everywhere I will put bedding. Like that when you tighten down the front action bolt the barrel stays up and doesn't put any pressure on the rear tang to rise. I also put a layer of painter tape on the side's, bottom and front of the recoil lug.
|