The Firing Line Forums - View Single Post

Metal god · September 29, 2012, 02:36 AM

All of those are great ARs to consider . Have you thought about building your own . My most recent build cost just over $1,000

and you can build a basic one for 6 to 7 hundred

. PSA has a very good product http://palmettostatearmory.com/ .

As for the stock and sight line . I am in no way an expert but its my understanding that the stock is straight because the BCG ( bolt carrier group ) must slide in to the buffer tube ( stock ) In the normal operation of the gun . If it was bent , curved or canted in any way the bolt would not operate as designed . The by product of this design is less muzzle rise .

I to live in C.A. . You can install the bullet button your self . If you live close to a Turners outdoorsman http://www.turners.com/ They tend to have sales all the time on ARs

September 29, 2012, 02:36 AM	#5
Metal god Senior Member Join Date: April 10, 2012 Location: San Diego CA Posts: 6,876	All of those are great ARs to consider . Have you thought about building your own . My most recent build cost just over $1,000 and you can build a basic one for 6 to 7 hundred . PSA has a very good product http://palmettostatearmory.com/ . As for the stock and sight line . I am in no way an expert but its my understanding that the stock is straight because the BCG ( bolt carrier group ) must slide in to the buffer tube ( stock ) In the normal operation of the gun . If it was bent , curved or canted in any way the bolt would not operate as designed . The by product of this design is less muzzle rise . I to live in C.A. . You can install the bullet button your self . If you live close to a Turners outdoorsman http://www.turners.com/ They tend to have sales all the time on ARs __________________ If Jesus had a gun , he'd probably still be alive ! I almost always write my posts regardless of content in a jovial manor and intent . If that's not how you took it , please try again . Last edited by Metal god; October 1, 2012 at 08:48 PM.