Thread: Snap cap info
View Single Post
Old January 22, 2013, 09:03 AM   #4
rodfac
Senior Member
 
Join Date: January 22, 2005
Location: Kentucky
Posts: 3,624
I use them, or spent cases in their place....opinions vary on whether dry fire is detrimental, but for .22's, unless the manuf. specifically states that dry fire is ok, I'd use one or at least a spent cartridge case to cushion the firing pin. Some makes of .22 will allow the nose of the firing pin to strike the barrel breach unless there is a cartridge or snap cap in place. Striking the barrel above the chamber, peens the edge and will eventually ruin both the barrel and pin.

You can make your own snap caps for center fire rounds by knocking out the primer and gluing a rubber eraser in it's place. They don't last forever but are easy to make replacements. I'm not familiar with Kel Tec pistols, but I'd say that a commercial snap cap or one the you make will suffice for protection of the firing pin, and would be ok for practice.

Best Regards, Rod
__________________
Cherish our flag, honor it, defend it in word and deed, or get the hell out. Our Bill of Rights has been paid for by heros in uniform and shall not be diluted by misguided governmental social experiments. We owe this to our children, anything less is cowardice. USAF FAC, 5th Spl Forces, Vietnam Vet '69-'73.
rodfac is offline  
 
Page generated in 0.03024 seconds with 8 queries