The Firing Line Forums - View Single Post - Brazos Lightning rod/MMC adj sights on Kimber

Mike in VA · February 24, 2002, 11:10 AM

Spoke with the smith and he suggested a stronger spring. He notedthat the stock spring appeared to be stretched and didn't really hold teh detent very well, so I took it back to have him install something stronger. I really don't want to gum-up the sight mechanism if I don't have to. We shall see how well this comes out, I'll let ya know.

I, too, really like th Brazos fiber optic sight. The blade fills about 2/3 of the MMC rear notch, so it's easy to center and when you have the top of the little glowing ball even with the top of the rear blade, you're good to go.

February 24, 2002, 11:10 AM	#3
Mike in VA Senior Member Join Date: October 16, 1998 Location: Santa FE, NM Posts: 2,163	Spoke with the smith and he suggested a stronger spring. He notedthat the stock spring appeared to be stretched and didn't really hold teh detent very well, so I took it back to have him install something stronger. I really don't want to gum-up the sight mechanism if I don't have to. We shall see how well this comes out, I'll let ya know. I, too, really like th Brazos fiber optic sight. The blade fills about 2/3 of the MMC rear notch, so it's easy to center and when you have the top of the little glowing ball even with the top of the rear blade, you're good to go. __________________ M2 The Second Amendment IS homeland defense!