The Firing Line Forums - View Single Post - Lock N load not indexing spot on every time

P.A. Dutchman · October 6, 2011, 08:33 AM

Sounds like a Pawl adjustment. I had to re-adjust mine a couple of weeks ago after 3 years of use for the same reason. The pawl you need to adjust is on the left side of the ram (for the down stroke), and just turn the allen head adjusting screw about 1/4 turn at a time till it lines up. 1/4 turn may be all you need.

October 6, 2011, 08:33 AM	#8
P.A. Dutchman Member Join Date: August 17, 2011 Posts: 51	Sounds like a Pawl adjustment. I had to re-adjust mine a couple of weeks ago after 3 years of use for the same reason. The pawl you need to adjust is on the left side of the ram (for the down stroke), and just turn the allen head adjusting screw about 1/4 turn at a time till it lines up. 1/4 turn may be all you need.